Bedienungsanleitung HP Photosmart 2570 (Seite 29 von 142) (Englisch)

584741

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

If you are using an external Bluetooth

adapter for your computer, make sure

your computer is started and then attach the Bluetooth

adapter to a USB port on

the computer. If you have Windows XP with Service Pack 2 installed, the

Bluetooth

drivers are installed automatically. If you are prompted to select a

Bluetooth

profile, select HCRP.

If your computer has Bluetooth

built in, just make sure the computer is started.

4. On the Windows taskbar, click Start, and then click Printers and Faxes.

5. Double-click the Add Printer icon.

6. Click Next, and then select A Bluetooth Printer.

7. Follow the onscreen instructions to finish the installation.

8. Print as you would to any printer.

To install and print using the Widcomm stack (Windows)

1. Make sure that you have installed the HP All-in-One software on the computer.

Note The purpose of installing the software is to make sure the print

driver is available for the Bluetooth

connection. Therefore, if you have

already installed the software, you do not need to reinstall it. If you want

both a USB and a Bluetooth

connection to your HP All-in-One, install the

USB connection first. For more information, see the printed Setup Guide.

However, if you do not want a USB connection, select Directly to the

computer on the Connection Type screen. Also, on the Connect Your

Device Now screen, select the check box next to If you are unable to

connect your device now... at the bottom of the screen.

Attach an HP Bluetooth

adapter to the front USB port of the HP All-in-One.

3. Click the My Bluetooth Places icon on the desktop or in the taskbar.

4. Click View devices in range.

5. Once the available printers are discovered, double-click the name of HP All-in-

One to finish the installation.

6. Print as you would to any printer.

Mac users

You can connect your HP All-in-One to a Mac that has Bluetooth

built in, or you can

install an external Bluetooth

adapter, such as an HP Bluetooth

adapter.

To install and print using Bluetooth

(Mac)

1. Make sure that you have installed the HP All-in-One software on the computer.

Attach an HP Bluetooth

adapter to the front USB port of the HP All-in-One.

3. Press the On button on the control panel to turn the HP All-in-One off, and press

it again to turn the device on.

Attach a Bluetooth

adapter to the computer and turn it on. Or, if your computer

has Bluetooth

built in, just turn on your computer.

5. Open the Printer Setup Utility from the Applications:Utilities folder.

Note This utility is called the Printer Setup Utility on 10.3 and later. It is

called Print Center on 10.2.x.

6. From the pop-up menu, choose Bluetooth, then click Add

Chapter 3

26 HP Photosmart 2570 All-in-One series

Finish setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart 2570 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart 2570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info