Bedienungsanleitung HP Photosmart 2600 series (Seite 45 von 241) (Englisch)

472676

Zoom out

Zoom in

Vorherige Seite

1/241

Nächste Seite

Load other types of paper

The following table provides guidelines for loading certain types of paper. For best

results, adjust the paper settings each time you change paper sizes or paper types. For

information on changing paper settings, see the onscreen HP Image Zone Help.

Note Not all paper sizes and paper types are available with all the functions on the

HP all-in-one. Some paper sizes and paper types can only be used if you are

starting a print job from the Print dialog box in a software application. They are

not available for copying, faxing, or printing photos from a memory card or digital

camera. Papers that are only available for printing from a software application

are indicated as such, below.

Paper

Tips

HP papers ● HP Premium Paper: Locate the gray arrow on the nonprinting side

of the paper, and then slide the paper into the input tray with the

arrow side facing up.

● HP Premium Inkjet Transparency Film: Insert the film so that the

white transparency strip (with arrows and the HP logo) is on top and

is going into the input tray first.

Note The HP all-in-one might not automatically detect

transparency film if it is loaded incorrectly, or if you use

transparency film other than HP transparency film. For best

results, set the paper type to transparency film before printing

or copying onto transparency film.

● HP Iron-On Transfers: Flatten the transfer sheet completely before

using it; do not load curled sheets. (To prevent curling, keep transfer

sheets sealed in the original package until you are ready to use

them.) Locate the blue stripe on the nonprinting side of the transfer

paper and then manually feed one sheet at a time into the input tray

with the blue stripe facing up.

● HP Matte Greeting Cards, HP Photo Greeting Cards, or

HP Textured Greeting Cards: Insert a small stack of HP greeting

card paper into the input tray with the print side down; slide the stack

of cards forward until it stops.

Labels

(for printing from a

software application

only)

Always use letter or A4 label sheets designed for use with HP inkjet

devices (such as Avery inkjet labels), and make sure that the labels are

not more than two years old. Labels on older sheets might peel off when

the paper is pulled through the HP all-in-one, causing subsequent paper

jams.

1 Fan the stack of labels to make sure none of the pages are sticking

together.

2 Place a stack of label sheets on top of full-size plain paper in the

input tray, label side down. Do not insert labels one sheet at a time.

Continuous banner

paper

Continuous banner paper is also known as computer or z-fold paper.

1 Remove the output tray.

Chapter 5

42 HP Photosmart 2600/2700 series all-in-one

Load originals and load paper

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart 2600 series Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart 2600 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info