Bedienungsanleitung HP Photosmart 2600 series (Seite 49 von 241) (Englisch)

472676

Zoom out

Zoom in

Vorherige Seite

1/241

Nächste Seite

● Bottom right slot: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with

user-supplied adapter), Memory Stick Pro

● PictBridge camera port (below the memory card slots): compatible with any USB-

equipped digital camera that supports PictBridge

Note The camera port only supports USB-equipped digital cameras that support

PictBridge. If you attach a USB device that is not a compatible digital camera (or

Bluetooth adapter) to the camera port , an error message appears on the color

graphics display. If you have an older HP-brand digital camera, try using the USB

cable that came with the camera. Plug it into the USB port on the back of the

HP all-in-one and not into the camera port near the memory card slots. This

works with HP digital cameras only.

Tip By default, Windows XP will format a memory card of 8 MB or less and 64 MB or

more with the FAT32 format. Digital cameras and other devices use the FAT

(FAT16 or FAT12) format and cannot operate with a FAT32 formatted card. Either

format your memory card in your camera or select FAT format to format your

memory card in a Windows XP PC.

Control memory card security on a network

Your HP all-in-one, if networked, lets computers on your network access the contents

of memory cards. When used on a wireless network that does not have wireless

encryption enabled, anyone within wireless range who knows your network name and

the HP all-in-one network ID can access the contents of your memory card while it is

inserted in the HP all-in-one.

You can increase the privacy of data on your memory cards by establishing a WEP

(Wired Equivalent Privacy) key or WPA/PSK (Wi-Fi Protected Access/Pre-Shared Key) )

on your wireless network or by setting the HP all-in-one so it never shares an inserted

memory card with networked computers, wireless or not. This means that other

computers on your network will also not be able to access the files on the memory

card.

For more information on adding encryption to a wireless network, see the Network

Guide.

Note The HP all-in-one never shares the contents of a memory card in a digital

camera that is connected to the HP all-in-one through the camera port.

1 Press Setup.

2 Press 8, and then press 3.

This displays the Network menu and then selects Advanced Setup.

3 Press 3 to select Memory Card Security.

4 Press the number next to the desired security option:

– 1. Share Files

– 2. Do Not Share Files

Transfer photos to your computer

After you take photos with your digital camera, you can print them immediately or save

them directly to your computer. To save them to your computer, you need to remove the

Chapter 6

46 HP Photosmart 2600/2700 series all-in-one

Memory Card and PictBridge

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart 2600 series Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart 2600 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info