Bedienungsanleitung HP Photosmart 3110 (Seite 42 von 166) (Englisch)

584737

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

To set up your HP All-in-One with a shared voice/fax line

1. Using the phone cord supplied in the box with your HP All-in-One, connect one

end to your telephone wall jack, then connect the other end to the port labeled "1-

LINE" on the back of your HP All-in-One.

Note If you do not use the supplied cord to connect from the telephone

wall jack to your HP All-in-One, you might not be able to fax successfully.

This special phone cord is different from the phone cords you might

already have in your home or office. If the supplied phone cord is too

short, see The phone cord that came with my HP All-in-One is not long

enough for information on extending it.

2. Do one of the following, depending on your phone system:

– If you have a parallel-type phone system, remove the white plug from the

port labeled "2-EXT" on the back of your HP All-in-One, and then connect a

phone to this port.

– If you have a serial-type phone system, you might plug your phone directly to

the telephone wall jack.

3. Now you need to decide how you want the HP All-in-One to answer calls,

automatically or manually:

– If you set up the HP All-in-One to answer calls automatically, it answers all

incoming calls and receives faxes. Your HP All-in-One will not be able to

distinguish between fax and voice calls in this case; if you suspect the call is

a voice call, you will need to answer it before the HP All-in-One answers the

call. To set up the HP All-in-One to answer calls automatically, change the

Auto Answer setting to On.

– If you set up the HP All-in-One to answer faxes manually, you must be

available to respond in person to incoming fax calls or your HP All-in-One

cannot receive faxes. To set up the HP All-in-One to answer calls manually,

change the Auto Answer setting to Off.

For information on changing this setting, see Set the answer mode.

4. Run a fax test. For information, see Test your fax setup.

If you pick up the phone before the HP All-in-One answers the call and hear fax tones

from a sending fax machine, you will need to answer the fax call manually. For

information, see Receive a fax manually.

Case F: Shared voice/fax line with voice mail

If you receive both voice calls and fax calls at the same phone number, and you also

subscribe to a voice mail service through your telephone company, set up your HP All-

in-One as described in this section.

Note You cannot receive faxes automatically if you have a voice mail service

at the same phone number you use for fax calls. You must receive faxes

manually; this means you must be available to respond in person to incoming

fax calls. If you want to receive faxes automatically instead, contact your

telephone company to subscribe to a distinctive ring service, or to obtain a

separate phone line for faxing.

User Guide 39

Finish setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart 3110 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart 3110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info