Bedienungsanleitung HP Photosmart 3213 (Seite 32 von 144) (Englisch)

585132

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

If you connect with a Windows computer, see the next section. If you connect with a

Mac, see Mac users.

Windows users

You must have Windows XP and either the Microsoft Bluetooth

Protocol Stack or the

Widcomm Bluetooth

Protocol Stack installed in order to connect your HP All-in-One.

It is possible to have both the Microsoft Stack and the Widcomm Stack on your

computer, but you use only one of them to connect your HP All-in-One.

● Microsoft stack If you have Windows XP with Service Pack 2 installed on your

computer, then your computer has the Microsoft Bluetooth

Protocol Stack. The

Microsoft stack allows you to install an external Bluetooth

adapter automatically.

If your Bluetooth

adapter supports the Microsoft stack but it does not install

automatically, then you do not have the Microsoft stack on your computer. Check

the documentation that came with the Bluetooth

adapter to see if it supports the

Microsoft stack.

●

Widcomm stack: If you have an HP computer with Bluetooth

built in, or if you

have installed an HP Bluetooth

adapter, then your computer has the Widcomm

stack. If you have an HP computer and plug in an HP Bluetooth

adapter, it will

install automatically using the Widcomm stack.

To install and print using the Microsoft stack (Windows)

1. Make sure that you have installed the HP All-in-One software on the computer.

Note The purpose of installing the software is to make sure the print

driver is available for the Bluetooth

connection. Therefore, if you have

already installed the software, you do not need to reinstall it. If you want

both a USB and a Bluetooth

connection to your HP All-in-One, install the

USB connection first. For more information, see the printed Setup Guide.

However, if you do not want a USB connection, select Directly to the

computer on the Connection Type screen. Also, on the Connect Your

Device Now screen, select the check box next to If you are unable to

connect your device now... at the bottom of the screen.

Attach an HP Bluetooth

adapter to the front USB port of the HP All-in-One.

If you are using an external Bluetooth

adapter for your computer, make sure

your computer is started and then attach the Bluetooth

adapter to a USB port on

the computer. If you have Windows XP with Service Pack 2 installed, the

Bluetooth

drivers are installed automatically. If you are prompted to select a

Bluetooth

profile, select HCRP.

If your computer has Bluetooth

built in, just make sure the computer is started.

4. On the Windows taskbar, click Start, and then click Printers and Faxes.

5. Double-click the Add Printer icon.

6. Click Next, and then select a A Bluetooth Printer.

7. Follow the onscreen instructions to finish the installation.

8. Print as you would to any printer.

User Guide 29

Finish setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart 3213 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart 3213

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info