Bedienungsanleitung HP Photosmart A520 series (Seite 20 von 72) (Englisch)

584691

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Print from a PictBridge-certified camera or device

This section describes the procedure for printing from a PictBridge digital camera. The

procedure for printing from other PictBridge devices—such as camera phones and other

image capture devices—is very similar. Review the documentation that came with your

PictBridge device for specific information.

NOTE: If you disconnect the camera while printing, all print jobs are cancelled.

To print using a PictBridge-certified camera

1. Load HP Advanced Photo Paper into the printer.

2. Turn on the PictBridge-certified digital camera.

3. Make sure the USB configuration setting of the camera is set to Digital Camera, and

then connect the camera to the camera port of the printer using the USB cable that

came with the PictBridge-certified camera. The PictBridge light flashes green while

the camera establishes a connection to the printer, and then turns solid green.

See the camera documentation for more information about the USB configuration

setting. The name of the setting and its options may differ on non-HP digital cameras.

4. If you already selected photos for printing on the camera, the Print DPOF Photos?

dialog box is displayed on the camera. Select No to bypass printing pre-selected

photos. DPOF (Digital Print Order Format) lets the user mark photos on a digital

camera for printing and include other image information, such as number of copies

to be printed.

5. Use the options and controls on your camera to print your photos. See the camera

documentation for more information. The On light and the PictBridge light flash while

the photos are printing.

Important: Your photos are instantly dry, and can be handled immediately after they are

printed. However, HP recommends that you leave the printed surface of your photos

exposed to the air for 3 minutes after printing to allow the colors to fully develop before

you stack them with other photos or place them in albums.

Print from a Bluetooth device

This section describes how to print from any device with Bluetooth wireless technology,

a short-range communications technology that enables a wide range of devices to

connect with each other without the clutter of cables.

To use Bluetooth connectivity with the HP Photosmart A520 series printer, you must

purchase and connect the optional HP Bluetooth

wireless printer adapter to the camera

port on the front of the printer. To learn how to print from a Bluetooth device, see the

documentation that came with your Bluetooth adapter.

This section contains the following topics:

•

Configure Bluetooth

•

Print photos from a Bluetooth device

NOTE: For more information on Bluetooth wireless technology and HP, go to

www.hp.com/go/bluetooth.

Print from a PictBridge-certified camera or device 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart A520 series Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart A520 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info