Bedienungsanleitung HP Photosmart C6300 (Seite 8 von 39) (Englisch)

563889

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

CAUTION: To prevent other users from accessing your wireless network, HP

strongly recommends using a password or passphrase (Wi-Fi Protected Access

(WPA) or Wired Equivalent Privacy (WEP) security) and a unique network name

(Service set identifier (SSID)) for your wireless router. Your wireless router might have

been shipped with a default network name, which is typically the manufacturer name.

If you use the default network name, your network can be easily accessed by other

users using the same default network name (SSID). It also means that the HP All-in-

One might accidently connect to a different wireless network in your area which uses

the same network name. If this happens you will not be able to access the HP All-in-

One. For more information on how to change the network name, see the

documentation that came with your wireless router.

NOTE: Before connecting to a wireless infrastructure network, ensure that an

Ethernet cable is not connected to the HP All-in-One.

To connect the product with the Wireless Setup Wizard

1. Write down the following information about your access point:

• Network Name (also called SSID)

• WEP Key, WPA Passphrase (if needed)

If you do not know where to find this information, see the documentation that came

with your wireless access point. You might be able to find the SSID and the WEP key

or WPA passphrase on the Embedded Web Server (EWS) for the access point. For

information on how to open the access point EWS, see the access point

documentation.

NOTE: If the network is set up with an Apple AirPort base station and you are

using a password instead of WEP HEX or WEP ASCII to access this network, you

need to get the equivalent WEP key. See the documentation that came with the

Apple AirPort base station for more information.

2. Press Setup.

3. Press the down arrow button until Network is highlighted, and then press OK.

4. Press the down arrow button to highlight Wireless Setup Wizard, and then press

OK.

This runs the Wireless Setup Wizard. The setup wizard searches for available

networks, and then displays a list of detected network names (SSIDs). The networks

with the strongest signal appear first, the weakest appear last.

5. Press the down arrow button to highlight the name of the network you wrote down in

step 1, and then press OK.

If you do not see your network name in the list

a.Select Enter a New Network Name (SSID). If necessary, use the down arrow

button to highlight it, and then press OK.

The visual keyboard appears.

b. Enter the SSID. Use the arrow buttons on the control panel to highlight a letter or

number on the visual keyboard, and then press OK to select it.

NOTE: You must enter the exact uppercase (capital) and lowercase (small)

letters. Otherwise, the wireless connection will fail.

Chapter 1

6 Network setup

Network setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart C6300 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart C6300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info