Bedienungsanleitung HP Photosmart C6340 (Seite 29 von 39) (Englisch)

563891

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

3 Troubleshooting and support

This chapter contains troubleshooting information for the HP All-in-One. Specific information is

provided for installation and configuration issues, and some operational topics. For more

troubleshooting information, see the onscreen Help that came with your software.

Many issues are caused when the HP All-in-One is connected to the computer using a USB cable

before the HP All-in-One software is installed on the computer. If you connected the HP All-in-One

to your computer before the software installation screen prompts you to do so, you must follow these

steps:

Troubleshooting common setup issues

1. Disconnect the USB cable from the computer.

2. Uninstall the software (if you have already installed it).

3. Restart your computer.

4. Turn off the product, wait one minute, then restart it.

5. Reinstall the product software.

CAUTION: Do not connect the USB cable to the computer until prompted by the software

installation screen.

For support contact information, see the inside back cover of this guide.

Uninstall and reinstall the software

If your installation is incomplete, or if you connected the USB cable to the computer before prompted

by the software installation screen, you might need to uninstall and then reinstall the software. Do

not simply delete the HP All-in-One application files from your computer. Make sure to remove them

properly using the uninstall utility provided when you installed the software that came with the HP All-

in-One.

To uninstall and reinstall the software

1. On the Windows taskbar, click Start, Settings, Control Panel (or just Control Panel).

2. Double-click Add/Remove Programs (or click Uninstall a program).

3. Select HP Photosmart All-In-One Driver Software, and then click Change/Remove.

Follow the onscreen instructions.

4. Disconnect the product from your computer.

5. Restart your computer.

NOTE: It is important that you disconnect the product before restarting your computer. Do

not connect the product to your computer until after you have reinstalled the software.

6. Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup

program.

NOTE: If the Setup program does not appear, locate the setup.exe file on the CD-ROM

drive and double-click it.

NOTE: If you no longer have the installation CD, you can download the software from

www.hp.com/support.

7. Follow the onscreen instructions and the instructions provided in the Start Here guide that came

with the product.

When the software installation is complete, the HP Digital Imaging Monitor icon appears in the

Windows system tray.

To verify that the software is properly installed, double-click the HP Solution Center icon on the

desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan

Document), the software has been properly installed.

Uninstall and reinstall the software 27

Troubleshooting and support

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Photosmart C6340 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Photosmart C6340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info