Bedienungsanleitung HP PHOTOSMART240 (Seite 24 von 42) (Englisch)

19406

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

hp photosmart 240 series

chapter 2

language 1

4 After printing the camera-selected photos, the printer asks whether you

want to unmark the camera-selected photos and delete the DPOF file. To

unmark the photos, press the SELECT PHOTOS  button to highlight Yes,

then press the OK button. To keep your selections so you can print the

same set of camera-selected photos again, press the S

ELECT PHOTOS 

button to highlight No, then press the OK button.

Note: Unmarking photos does not delete the photos from the memory card.

For information about changing the printer’s default setting for unmarking

camera-selected photos after printing, see change printer preferences on

page 23.

If you have an HP direct-printing digital camera, you can also print camera-

selected photos by connecting the camera directly to the printer. For more

information, see the HP Photosmart Printer Help. For information about viewing

the Printer Help, see view the hp photosmart printer help on page 1.

enhance your photos

The control panel on your printer is designed to make photo projects fun and

easy. You can crop your photos, adjust the brightness of your photos, and add

decorative frames and special color effects to your photos. The affordable

projects you can create are endless—just use your imagination!

Note: All of the print settings described in this section are applied to

individual photos and are discarded when you deselect the photo.

crop a photo

When you print from a memory card, you can use the printer’s control panel to

crop a photo so only your favorite portion of the photo prints.

1 Insert a memory card into the printer’s memory card slot. For more

information, see insert a memory card on page 12.

2 Press the S

ELECT PHOTOS  or  button to highlight the photo layout you

want to print—1, 2, or 4 photos per page—then press the OK button.

3 When the first photo on the memory card appears on the printer’s LCD

screen, press the S

ELECT PHOTOS  or  button to navigate to the photo

you want to crop. When the photo you want to crop appears on the

printer’s LCD screen, press the OK button to select it.

4 Press the Z

OOM + button on the printer’s control panel.

Four arrows on the printer’s LCD screen blink briefly to indicate

that you are entering Zoom mode. The print settings at the bottom

of the display are replaced by the Zoom icon and magnification

level.

Note: Make sure to press the Z

OOM + button first. If you press the ZOOM

– button first, the printer will exit Zoom mode and go to 9-up view mode. (In

9-up view mode, 9 photos appear on the printer’s LCD screen at a time.) To

return to Zoom mode for the selected photo, press the Z

OOM + button twice.

5 Press the Z

OOM + button to increase the magnification level by 0.25x. The

maximum magnification level is 5.0x.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP PHOTOSMART240 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP PHOTOSMART240

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info