Bedienungsanleitung HP Pre 3 (Seite 70 von 234) (Englisch)

678998

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

70 Chapter 6 : Phone

Use a phone headset

You can connect a 3.5 mm headset to your smartphone for hands-free

operation. If a 3.5 mm headset was not included in your smartphone

package, you can purchase one separately. You can also connect to a

wireless headset (sold separately) using Bluetooth

wireless technology.

WARNING If driving while using a phone is permitted in your area, we

recommend using a headset or hands-free car kit (sold separately). However, be

aware that use of a headset that covers both ears impairs your ability to hear

other sounds. Use of such a headset while operating a motor vehicle or riding a

bicycle may create a serious hazard to you and others, and may be illegal. If

you must use a stereo headset while driving, place a speaker in only one ear.

Leave the other ear free to hear outside noises, and use the headset only if it is

legal and you can do so safely.

Use a wired headset

Your smartphone works with headsets that have a 3.5 mm connector

(look for three coloured bands on the plug). When in doubt, ask the

third-party headset manufacturer if the product is compatible with your

smartphone. If you hear a headset buzz or poor microphone

performance, your headset may be incompatible with your smartphone.

1 Insert a 3.5 mm headset into the jack on the top of your smartphone.

When you are on a call, the icon changes to .

2 The button on the headset performs different actions depending on

the headset model and what's happening on the smartphone. Press

the button once to perform any of the following tasks supported by

your particular headset:

• Answer an incoming call.

• Respond to call waiting.

• Hang up a single active call or all calls on a conference call.

• Switch between calls if there is one active call and one call on

hold.

3 If you want to stop using the headset, do any of the following:

• To switch from the headset to your smartphone's speakerphone:

Tap and tap Speaker.

• To switch from the wired headset to a previously paired Bluetooth

hands-free device: Tap and tap the device name.

• To use your smartphone without the headset: Disconnect the

headset.

Set up and use a Bluetooth

hands-free device

Your smartphone is compatible with many headsets and car kits (sold

separately) enabled with Bluetooth

wireless technology version 2.1, with

EDR and Stereo (with AVRCP media controls).

After you set up a connection with a Bluetooth headset or hands-free car

kit, you can communicate using that device whenever it is within range

and the Bluetooth feature on your smartphone is turned on. The range can

vary greatly, depending on environmental factors. The maximum is about

10 metres.

For more information on using the Bluetooth feature on your smartphone,

see Bluetooth

wireless technology.

NOTE You can use an A2DP-enabled Bluetooth headset or speakers to listen to

music files on your smartphone.

1 Open Bluetooth .

2 If the Bluetooth setting at the top of the screen is off, tap Off to switch

the Bluetooth feature from Off to On.

3 Tap Add device.

4 In Type, make sure Audio is selected.

5 Tap the device name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Pre 3 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Pre 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info