Bedienungsanleitung HP Pre 3 (Seite 140 von 234) (Englisch)

678998

140

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

140 Chapter 10 : Web and wireless connections

2 If required, review the security certificate notices and tap one of the

following:

Trust Certificate: Connects you to the captive portal page

automatically whenever you connect to this Wi-Fi access point.

Trust Certificate Once: Connects you to the captive portal page for

this session only. The next time you try to connect to this Wi-Fi access

point, you will be asked to trust this certificate again.

Don't Trust Certificate: Cancels the connection.

3 Your Wi-Fi host may require you to view advertisements, pay a fee or

accept conditions of use. Follow the instructions onscreen.

Disconnect from a network

When you disconnect from a network, you can keep it on your list of

known networks so that your smartphone can automatically connect to it

again. If you remove the network from your list of known networks,

however, you must reconnect to the network. Follow the steps in Connect

to a new open network or Connect to a new secure network to connect to

the network again.

• To disconnect from a network but keep it on your list of known networks:

Turn off Wi-Fi (see Turn Wi-Fi on/off). This disconnects you from the

network.

• To disconnect from a network and remove it from your list of known

networks: Open Wi-Fi . Tap the network name and then tap Forget

Network.

Put Wi-Fi to sleep when the screen is off

By default, your smartphone keeps its Wi-Fi connection active even when

the screen is dark. If, however, you find that a Wi-Fi connection is

constantly, unnecessarily waking up your smartphone, you can save

battery power by turning off this setting. When you turn the screen on

again, the Wi-Fi connection is reactivated.

1 Open Wi-Fi .

2 Open the application menu and tap Sleep Settings.

3 The current setting is displayed in the When Phone Sleeps field. To

change the setting, tap the current setting and then select the other

option from the displayed list.

Customise connection settings

Do not change Wi-Fi settings unless you are having trouble connecting to

a network.

BEFORE YOU BEGIN You must be connected to the network you want to

customise (see Connect to a new open network, Connect to a new secure

network or Connect to a previously used network).

1 Open Wi-Fi .

2 Tap the network name.

3 In Automatic IP settings, tap On or Off.

• When Automatic IP settings is on, the IP address is automatically

and dynamically configured.

• When Automatic IP settings is off, you can manually configure the

IP address.

4 If you turned Automatic IP settings off, enter any of the following:

Address: The IP address of the network

Subnet: The Subnet address of the network

Gateway: The Gateway address of the network

DNS Servers: Addresses (#1 and #2)

You may need to contact your system administrator for this

information.

5 Tap Done.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Pre 3 Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Pre 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info