678998
155
Zoom out
Zoom in
Vorherige Seite
1/234
Nächste Seite
Chapter 10 : Web and wireless connections 155
The screen prompts you to enter a passkey: Check the
documentation that came with the other device to see if there's a
required passkey. If so, enter that passkey on your smartphone. If
not, make up a passkey and enter it on both devices.
Connect with a paired device
After you pair with a device, you can connect to that device without
having to go through the pairing process again.
1 Open Bluetooth .
2 Make sure Bluetooth is on (see Turn the Bluetooth feature on/off)
and tap the device name.
NOTE To connect with a paired computer, you must initiate the connection from
the computer. See the computer documentation for instructions.
Forward contact phone numbers or text messages to a car kit
If your Bluetooth car kit has phonebook capability, you can set your
phone to pass contact information from Contacts to the car kit. If your car
kit is capable of receiving text messages, you can also set your phone to
automatically forward text messages to the car kit.
1 Open Bluetooth .
2 Tap beside the car kit name.
3 Tap On/Off for either of the following:
Phonebook Access: Passes your contact phone numbers in Contacts
to your car kit.
Message Access: Allows your car kit to receive text messages
forwarded from your phone.
Disconnect from a device
Disconnecting from a device does not mean you delete the relationship
you created between the device and your smartphone. See Connect with
a paired device for instructions on how to reconnect with the device.
1 Open Bluetooth .
2 Tap the connected device name to disconnect from it. Or tap
another device name to disconnect from the current device and
connect to the new device.
Delete a device
Deleting a device means you end the relationship you created between
your smartphone and the device. This means that you will need to pair
with the device again if you want to connect (see Make a pairing request
to another device or Accept a pairing request from another device). If all
you want to do is temporarily disconnect from a device, see Disconnect
from a device.
1 Open Bluetooth .
2 Throw the name off the side of the screen and tap Delete.
Rename a device
1 Open Bluetooth .
2 Tap and hold the device name.
3 Enter a new name.
155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP Pre 3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von HP Pre 3

HP Pre 3 Bedienungsanleitung - Deutsch - 266 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info