Bedienungsanleitung HP Pre 3 (Seite 196 von 234) (Englisch)

678998

196

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

196 Chapter 14 : Troubleshooting

My voice is too quiet on the other end

• Make sure you position the microphone, which is below the keyboard,

close to your mouth. Make sure you are not covering the microphone

with your cheek or chin.

• Check the signal-strength icon. If the signal is weak, try to find an

area with better coverage (see Signal strength is weak).

I hear static or interference

Check the signal-strength icon. If the signal is weak, try to find an

area with better coverage (see Signal strength is weak).

If you're using a hands-free device enabled with Bluetooth

wireless

technology, try the following:

• Move your smartphone closer to the hands-free device. Audio quality

degrades as the distance between your smartphone and the hands-free

device increases. The effective range for a hands-free device varies

among manufacturers.

• Confirm that no obstructions, including your body, are between the

smartphone and your hands-free device. For example, move your

smartphone to the same side of your body as your hands-free device.

My smartphone seems to turn off by itself

Your smartphone has a power-saving feature that's set to turn off the

screen if it has been idle for one minute. You can change the auto-shut off

interval (see Set the interval for turning the screen off automatically).

If you restart your smartphone, wireless services, such as Wi-Fi and

Bluetooth, are automatically turned on if they were on before the restart.

However, if the smartphone can't determine if a wireless service was on

before the restart, that service does not automatically turn on (see Turn

your smartphone on/off).

My smartphone doesn't ring

• Make sure the ringer switch is turned on. If you can see the red next to

the switch, the ringer switch is turned off. Slide the ringer switch on.

• Check the ringtone volume. Open Sounds & Ringtones and drag

the Ringtone Volume slider to the right to increase the ringtone volume.

• If you are using a ringtone you installed, open Sounds & Ringtones

and tap Ringtone. Tap the default ringtone for your smartphone. If

selecting the default ringtone solves the problem, the ringtone you

installed is not working properly. Delete the ringtone you installed from

your smartphone by following the steps in Delete files and folders using

USB Drive mode.

My smartphone doesn't vibrate

• Make sure the ringer switch is turned on. If you can see the red next to

the switch, the ringer switch is turned off. Slide the ringer switch on.

(The ringer switch needs to be on to test vibrate mode.)

• Make sure the vibrate settings are turned on:

• Open Sounds & Ringtones .

• Under Ringer Switch Off, tap Rings & Alerts and then tap Vibrate.

• Under Ringer Switch On, tap Rings & Alerts and then tap Sound &

Vibrate.

• Tap, hold and drag the Ringtone Volume slider in either direction. The

smartphone should vibrate, and the ringtone should play.

I am working with a support agent and need to find my IMEI

number

Do one of the following:

• Open Device Info , tap More Info and tap Hardware. The IMEI

number is listed under Network.

• Open Phone and enter *#06# on the dial pad or the keyboard.

Tap .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Pre 3 Seite 196

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Pre 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info