Bedienungsanleitung HP ProBook 11 EE G1 (Seite 25 von 90) (Englisch)

621893

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Connecting to a WLAN

To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on. If the device is on, the wireless light is on. If the wireless light is off,

press the wireless button.

NOTE: On some models, the wireless light is amber when all wireless devices are off.

2. From the Start screen, point to the far-right upper or lower corner of the screen to display the charms.

3. Select Settings, and then click the network status icon.

4. Select your WLAN from the list.

5. Click Connect.

If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and

then click Sign in.

NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.

NOTE: If you do not see the WLAN you want to connect to, from the Windows desktop, right-click the

network status icon, and then select Open Network and Sharing Center. Click Set up a new connection

or network. A list of options is displayed, allowing you to manually search for and connect to a network

or to create a new network connection.

6. Follow the on-screen instructions to complete the connection.

After the connection is made, place the mouse pointer over the network status icon in the notification area,

at the far right of the taskbar, to verify the name and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation,

router manufacturer, and interference from other electronic devices or structural barriers such as walls and

floors.

Using HP Mobile Broadband (select models only)

Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer,

when used with a mobile operator’s network, gives you the freedom to connect to the Internet, send e-mail,

or connect to your corporate network without the need for Wi-Fi hotspots.

You may need the HP Mobile Broadband Module serial number to activate mobile broadband service. The

serial number may be located inside the battery bay, under the removable service door, or on the back of the

display.

Some mobile network operators require the use of a SIM card. A SIM card contains basic information about

you, such as a personal identification number (PIN), as well as network information. Some computers include

a SIM card that is preinstalled in the battery bay. If the SIM card is not preinstalled, it may be provided in the

HP Mobile Broadband information provided with your computer or the mobile network operator may provide

it separately from the computer.

Before you can use the mobile broadband capability of your computer, you must complete the following

steps:

1. Activate mobile broadband data service. To do this, use a compatible activated SIM card from your

service provider.

2. With the computer off, insert the activated SIM card into the SIM slot of the computer. See Inserting and

removing a SIM card (select models only).

Connecting to a wireless network 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP ProBook 11 EE G1 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP ProBook 11 EE G1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info