Bedienungsanleitung HP ProBook 440 G0 (Seite 108 von 143) (Englisch)

621890

108

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

BIOS version information (also known as ROM date and System BIOS) can be displayed as follows:

1. Start Computer Setup.

2. Use a pointing device or the arrow keys to select File > System Information.

3. To exit Computer Setup without saving your changes, click the Exit icon in the lower-left corner of the

screen, and then follow the on-screen instructions.

– or –

Use the tab key and the arrow keys to select File > Ignore Changes and Exit, and then press enter.

NOTE: You can also determine the BIOS version by turning on or restarting the computer, pressing the esc

key while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen, and

then pressing the f1 key. Follow the on-screen instructions to exit this screen.

Downloading a BIOS update

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and

install a BIOS update only when the computer is connected to reliable external power using the AC adapter.

Do not download or install a BIOS update while the computer is running on battery power, docked in an

optional docking device, or connected to an optional power source. During the download and installation,

follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Suspend or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1. Open your web browser. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide

support, go to

http://welcome.hp.com/country/us/en/wwcontact_us.html.

2. Follow the on-screen instructions to identify your computer and access the BIOS update you want to

download.

3. Click the option for software and driver downloads, type your computer model number in the product

box, and then press enter. Follow the on-screen instructions to identify your computer and access the

BIOS update you want to download.

4. Click your specific product from the models listed.

5. Click the appropriate operating system.

6. Go to the BIOS section and download the BIOS software package.

7. Follow the installation instructions as provided with the downloaded BIOS software package.

NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Using Advanced System Diagnostics

Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is

functioning properly. The following diagnostic tests are available in Advanced System Diagnostics:

●

Start-up test—This test analyzes the main computer components that are required to start the

computer.

●

Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up

test does not detect.

98 Chapter 9 Computer Setup (BIOS) and Advanced System Diagnostics in SUSE Linux

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP ProBook 440 G0 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP ProBook 440 G0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info