617376
116
Zoom out
Zoom in
Vorherige Seite
1/134
Nächste Seite
3. Wait until the print carriage is idle and silent, and then remove the print cartridges from their
slots. For information on removing the print cartridges, see Replace the print cartridges.
Note If your HP All-in-One does not turn on, you can unplug the power cord and
then manually slide the print carriage to the far right to remove the print cartridges.
When finished, manually move the print carriage to the home position (on the left
side), then proceed to step 6.
4. Close the print-carriage access door and wait a few minutes for the print carriage to move
back to its home position (on the left side).
Note Make sure the scanner has returned to its parked position before turning off
the HP All-in-One.
5. Press the On button to turn off the HP All-in-One, and then unplug the power cord.
6. Place the print cartridges in print cartridge protectors or an airtight plastic container so they
will not dry out, and put them aside. Do not send them with the HP All-in-One unless the
HP customer support call agent instructs you to.
7. Disconnect the power cord from the HP All-in-One.
Note Do not return the power cord and power supply with the HP All-in-One. The
replacement HP All-in-One will not be shipped with these items. Store the power
cord and power supply in a safe place until the replacement HP All-in-One arrives.
8. Remove the control panel overlay as follows:
a. Make sure the control panel display is lying flat against the HP All-in-One.
b. Raise the lid.
c. Place your thumb along the groove on the left side of the control panel overlay. Gently
remove the control panel overlay from the device as shown below.
9. Retain the control panel overlay. Do not return the control panel overlay with the HP All-in-
One.
Note The replacement HP All-in-One might not come with a control panel overlay.
Store your control panel overlay in a safe place, and when the replacement HP All-
in-One arrives, reattach your control panel overlay. You must attach your control
panel overlay to use the control panel functions on the replacement HP All-in-One.
User Guide 113
Get HP support
116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

hp-psc-1610-all-in-one

Suche zurücksetzen

  • zieht das papier nicht ein
    fehiermeidung kein papier Eingereicht am 19-2-2018 14:21

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP PSC 1610 All-in-One wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von HP PSC 1610 All-in-One

HP PSC 1610 All-in-One Bedienungsanleitung - Deutsch - 152 seiten

HP PSC 1610 All-in-One Bedienungsanleitung - Holländisch - 150 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info