212604
81
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
Back to TOC Troubleshooting usage and maintaining 81
An original photo was fuzzy, and the scanned image looks even
worse.
The sharpening level needs to be increased. In the
HP PrecisionScan Pro software, adjust the sharpening. See
"Sharpening an image" on page 38.
Scanned images are grainy, jagged, or fuzzy.
You resized the image in a program other than the
HP PrecisionScan Pro software. Resize the image in the
HP PrecisionScan Pro software before you send it to the other
program. (See "Resizing (output dimensions)" on page 35.)
In the HP PrecisionScan Pro software, the resolution is set too
low. Set the resolution to a higher number, or return to the
default setting. See "Changing resolution" on page 36.
In the HP PrecisionScan Pro software, too much or too little
sharpening was applied. Adjust the sharpening. See
"Sharpening an image" on page 38.
An original photo had marks, flaws, or scratches, and the scanned
image looks even worse in the HP PrecisionScan Pro software.
You sharpened the image manually. Return to the default
setting. See "Sharpening an image" on page 38.
Best Quality Sharpening is selected. Check the setting. See
"Setting preferences" on page 60.
I set the image to a higher resolution in the HP PrecisionScan Pro
software, but the output quality is no better.
Setting the resolution to a higher number does not necessarily
improve quality. The software sets the resolution automatically
based on the type of item you scanned. Keep or return to the
default. See "Changing resolution" on page 36 or "Tips for best
image quality" on page 59 for guidelines.
If you sent the image to another program, the program might not
support the resolution you set in the HP PrecisionScan Pro
software. Determine the setting the program uses and set the
resolution in the HP PrecisionScan Pro software to that
resolution.
Images scanned from the HP PrecisionScan Pro software are larger
than the original when viewed or printed from another program.
The other program did not accept the image size information. Scan
the image at a lower resolution. When you scan at a resolution the
program accepts, it will display or print the image at the correct
size.
The image is too big or too small.
In the HP PrecisionScan Pro software, set the physical width and
height of the image in the Resize dialog box. See "Resizing (output
dimensions)" on page 35.
When I try to scan to the Web from the HP PrecisionScan Pro
software, the image is too large or does not look good on screen.
Scan settings for this image might be set incorrectly. See "Tips for
best image quality" on page 59.
81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HP scanjet 7490c wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von HP scanjet 7490c

HP scanjet 7490c Bedienungsanleitung - Holländisch - 133 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info