Bedienungsanleitung HP Spectre 13-h200 x2 (Seite 33 von 86) (Englisch)

543171

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

After the connection is made, place the mouse pointer over the network status icon in the notification

area, at the far right of the taskbar, to verify the name and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN

implementation, router manufacturer, and interference from other electronic devices or structural

barriers such as walls and floors.

Using HP Mobile Broadband (select models only)

HP Mobile Broadband enables your computer to use WWANs to access the Internet from more

places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a

network service provider (called a mobile network operator), which in most cases is a cellular phone

network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage.

When used with mobile network operator service, HP Mobile Broadband gives you the freedom to

stay connected to the Internet, send email, or connect to your corporate network whether you are on

the road or outside the range of Wi-Fi hotspots.

HP supports the following technologies:

●

HSPA (High Speed Packet Access), which provides access to networks based on the Global

System for Mobile Communications (GSM) telecommunications standard.

●

EV-DO (Evolution Data Optimized), which provides access to networks based on the code

division multiple access (CDMA) telecommunications standard.

●

LTE (Long Term Evolution), which provides access to networks supporting LTE technology.

You may need the HP Mobile Broadband Module serial number to activate mobile broadband service.

The serial number is printed on a label located on the bottom of your computer.

Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains

basic information about you, such as a personal identification number (PIN), as well as network

information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not

preinstalled, it may be provided in the HP Mobile Broadband information provided with your computer

or the mobile network operator may provide it separately from the computer.

For information about inserting and removing the SIM, see the

Inserting and removing a SIM

on page 23 section in this chapter.

For information about HP Mobile Broadband and how to activate service with a preferred mobile

network operator, see the HP Mobile Broadband information included with your computer.

Inserting and removing a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM, follow these steps:

1. Shut down the computer.

2. If the keyboard base is attached to the tablet, close the display.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

ENWW Connecting to a wireless network 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Spectre 13-h200 x2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Spectre 13-h200 x2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info