Bedienungsanleitung HP Spectre 13 x2 Pro PC (Seite 72 von 80) (Englisch)

604924

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

If entering a security code is not the problem, you may have a corrupted WLAN connection. Many

times, Windows can automatically repair a corrupted WLAN connection.

●

If there is a network status icon in the notification area, at the far right of the taskbar, right-click

the icon, and then click Troubleshoot problems.

Windows resets your network device and attempts to reconnect to one of the preferred

networks.

●

If there is no network status icon in the notification area, follow these steps:

1. Start > Control Panel > Network and Internet > Network and Sharing Center.

2. Click Troubleshoot problems and select the network you wish to repair.

Current network security codes are unavailable

If you are prompted for a security code (or network key) or a name (SSID) when connecting to a

WLAN, the network is protected by security. You must have the current codes to make a connection

on a secure network. The SSID and security code are alphanumeric codes that you enter into your

computer to identify your computer to the network.

●

For a network connected to your personal wireless router, review the router user guide for

instructions on setting up the same codes on both the router and the WLAN device.

●

For a private network, such as a network in an office or at a public Internet chat room, contact

the network administrator to obtain the codes, and then enter the codes when prompted to do

so.

Some networks change the SSID or network keys used in their routers or access points on a

regular basis to improve security. You must change the corresponding code in your computer

accordingly.

If you are provided with new wireless network keys and SSID for a network, and if you have

previously connected to that network, follow the steps below to connect to the network:

1. Select Start > Control Panel > Network and Internet > Network and Sharing Center.

2. In the left panel, click Manage wireless networks.

A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs

are active, several will be displayed.

3. Select the network in the list, right-click the network, and then click Properties.

NOTE: If the network you want is not listed, check with the network administrator to be sure

that the router or access point is operating.

4. Click the Security tab and enter the correct wireless encryption data into the Network security

key box.

5. Click OK to save these settings.

WLAN connection is very weak

If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize

interference from other devices, as follows:

●

Move your computer closer to the wireless router or access point.

●

Temporarily disconnect wireless devices such as a microwave, cordless phone, or cellular

phone to be sure that other wireless devices are not interfering.

62 Chapter 13 Troubleshooting and support

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Spectre 13 x2 Pro PC Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Spectre 13 x2 Pro PC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info