Bedienungsanleitung HP Sprocket 2-in-1 (Seite 5 von 16) (Englisch)

682197

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Charging Battery and Powering On/O

1. To charge, insert the Micro-USB Charging Cable into the HP Sprocket 2-in-1.

2. Connect the Micro-USB Cable to a power source.

3. When connected, the device will automatically power on and the Status

Indicator LED Lights will turn red to indicate charging.

4. To charge fully, allow the device to charge for approximately 90 minutes if using

a 2 amp charger and 120 minutes if using a 1 amp charger, or until the Charging

Indicator LED Light turns o.

5. Turn on the device by sliding the Power Switch until the Status Indicator LED

Lights illuminate and turns solid white.

6. Turn o the device by sliding the Power Switch until the Status Indicator LED

Light goes dark.

• Continued use during charging will slow down the charging speed.

• Connect the Micro-USB Cable to a power source capable of supplying 5Vdc/2A.

Instant Camera Mode and Printer Mode

Your HP Sprocket 2-in-1 easily transforms between an instant camera and a mobile smartphone

printer.

To use in Instant Camera Mode

1. Open the Viewnder by gently pressing straight down on the indicated edge.

•

Do NOT pull up on the Viewnder or pry it open. This can break the locking functionality in the Viewnder

and prevent the device from operating in Printer Mode.

• When the Viewnder is open, the device is in Instant Camera Mode. To print from the app, make sure

Bluetooth is on for your mobile device and paired with your printer.

2. Raise the Viewnder to your eye. Press down on the Shutter Release Button to take an instant

photo. When paper is loaded in the device, the photo will begin to print instantly.

• The instant photo will only be saved for future use if a micro-SD card (not included) is inserted in the HP

Sprocket 2-in-1.

• The instant camera has instant focus capabilities; the Shutter Release Button does not need to be pressed

down halfway before taking a photo. Press down completely on the button to snap a photo.

Caution:

• Do not insert more than 1 pack of HP Sprocket Photo Paper (10 sheets plus 1 Smartsheet®) into the device at a time to avoid paper

jams or print errors.

• Only use 2 x 3” (5 x 7.6 cm) HP Sprocket Photo Paper with the device to avoid paper jams and malfunctions. You can purchase

additional paper within the sprocket app by tapping “Buy Paper” in the Main Menu.

• In the case of a paper jam, do not pull on the paper. Instead, turn the device o and on again to automatically eject the paper.

• Do not pull the paper out of the device during printing.

• If spills or moisture collect on a photo, wipe it away as soon as possible to prevent color damage.

• Keep photo paper clean and free of bends or damage for best print quality.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Sprocket 2-in-1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Sprocket 2-in-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info