Bedienungsanleitung HP Sprocket 200 serie (Seite 4 von 10) (Englisch)

682196

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

What if my HP Sprocket isn’t responding or won’t

connect to my mobile device?

If you have trouble connecting or other issues, reset the device.

Remove the Paper Cover and press and hold the small button near the

Paper Tray until the printer turns o. Restart the device.

Caring for your HP Sprocket 200

• Remove ngerprints, dust, and dirt from the printer using a dry microber cloth.

• Keep the Paper Cover on to prevent dust and debris from entering the paper path.

• Update the printer rmware. Make sure your mobile device is connected to the Internet and then open the HP

Sprocket app. If there is a rmware update available, a rmware update screen displays. Follow the on-screen

prompts to complete the update. Your printer must be charged to 25% or higher before a rmware update.

• Keep your sprocket app updated. If you don’t have your mobile app set to automatically update, go to the

appropriate app store and make sure the latest version is installed.

There are two ways you might need to reset your sprocket printer.

Hardware Reset

If the printer isn't responding or won't connect to your mobile device, try performing a hardware reset. Remove the

Paper Cover and press and hold the small round button near the Paper Tray until the printer turns o. The printer

will automatically restart. When you complete a hardware reset, your personalized settings will not be reset (Custom

Name, Personal Color, etc.).

How to Reset your Sprocket 200

Factory Reset

If you need to return to the factory default settings or want to gift your sprocket to someone else, complete a

factory reset. A factory reset might also be used if Privacy is turned on for your mobile device and the device is lost.

Completing a factory reset would allow a new phone to connect. Before completing a factory reset, update your printer

rmware.

You can initiate a factory reset by using the steps below. A factory reset can only be completed when the USB

charging cable is NOT connected to the printer.

1. Hold the power button for about 7 seconds total. After 3 seconds, the Status LED light will turn o to indicate the printer

is shutting down; continue to hold the Power button until the LED lights start to ash.

2. Release the power button. The LEDs will continue blinking for about 6 seconds.

3. While the LEDs are blinking, press and release the power button. The device will remain o until you power on again.

4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory defaults

(Custom Name, LED color, Sleep Time, Auto-O, etc.)

If you decide you do NOT want to reset the printer to factory defaults, you can abandon the reset. While the LEDs are

blinking, do not press the Power button as directed in step three above. This will also cancel the factory reset.

If you want to pair again with your device after a Factory Reset, make sure to also "forget" your device in your operating

system's Paired Devices list. Then, re-pair.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Sprocket 200 serie Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Sprocket 200 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info