AL 600plus 17
– Immediately discontinue using the device, if an error is determined in the
supply cable.
– The device may only be used on a stable and non-combustible surface.
– Only use the device outside of the vehicle.
– Ensure a safe and stable connection when connecting the battery charging
clamps.
– Never use in the case of adverse ambient conditions. Adverse ambient
conditions are: Ambient temperatures below –25 °C or above +50 °C,
combustible gases, solvents, vapours, dust, air humidity above 80 % as well
as wetness.
– The device may only be used in dry and closed rooms.
Malfunction
If it can be assumed that a safe operation of the device is no longer possible
the device should immediately be disconnected, removed and secured against
unintentional use. This case is applicable if:
– The device shows any signs of damage.
– The device is no longer functional.
– Parts of the device have become loose.
– The connecting wires show signs of damage.
– There are smoke emissions or penetration of liquids etc.
If the device needs to be repaired, only the original spare parts may be
used. The use of other components or components with different values can
cause damages and be hazardous. Repairs may only be done by a trained
specialist!
3. DANGER
Danger by reverse polarity, short-circuit and contact with battery acid – always
observed the safety instructions of the lead battery manufacturer.
Caution! Battery acid is extremely corrosive. Immediately treat acid splashes
on skin or clothes
with a soap solution and rinse with lots of water. Acid splas-
hes in the eye must be immediately rinsed with lots of water; consult a physician
immediately.
