Bedienungsanleitung HTronic AL 800compact (Seite 9 von 38) (Deutsch)

500674

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

werden!

Sie erfüllen damit die gesetzlichen Ver-

pichtungen und leisten Ihren Beitrag

zum Umweltschutz.

Automatic charger AL 800 compact

Before using the device, please consider

the instructions in this manual.

It is required by law that we give you im-

portant instructions for your own safety

and make you aware of how you can

avoid damage to people, the device and

other facilities.

If this manual is not taken into considera-

tion, the manufacturer is not liable for any

damage that results from negligence or

deliberate disregard of the manual.

Danger during charger operation

The charger is produced according to the

state of the art and approved safety-rela-

ted regulations. However, in case of mal-

operation or misuse, there is the threat to

- physical condition and life of the user or

third parties,

- the charger and equipment of the ope-

rator.

Every person who deals with the set-up,

operation, maintenance and Servicing of

the charger, must be either accordingly

qualied, acquire or have knowledge in

handling chargers and consider this ma-

nual in detail.

Errors affecting safety must be avoided

and if necessary xed immediately.

To ensure safe operation, the operator

must consider the safety instructions and

warnings included in the manual.

Intended use

The device is designed for automatic

charge and buffering of lead batteries

with 2, 6 or 12V

terminal tension. A sliding switch carries

out the set-up of the battery voltage.

Possible battery types are lead-gel, lead-

eece or lead-acid-batteries.

Primary batteries (zinc-carbon, alkaline,

etc.) or other battery types must not be

plugged in or charged.

Another mode of operation other than the

one specied is not allowed and results in

the damage of the product.

In addition, this is linked with dangers,

such as short-circuit, ring, electric shock

etc.

Specications

The I-U-charging concept charges the

lead-battery with constant current of 800

mA (0,8A) until the end of charge voltage

is reached for the respective battery.

The charger recognises this and switches

to constant current in order to adjust the

charging current down (Maintenance

charger). The battery charger is therefore

maintained at an ideal level.

As a result, the battery can be plugged

into the charger for a longer period of

time. This is the reason why this device

is suitable for “over wintering”. The lumi-

nous display on the charger always gives

information on the current operating sta-

tus. The plug charger is protected against

overcharge and short-term short-circuit

(<1min.). The polarity on the charging out-

put must be taken into consideration. A

protective circuit avoids charging in case

of incorrect poling that could destroy the

battery as well as the charger. Incorrect

poling will be indicated by a red light. The

connection is carried out by marked bat-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HTronic AL 800compact Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info