758063
14
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
After completing your workout, you can check your average heart rate, maximum
heart rate, and heart rate zone on the workout results screen.
During the workout, if you remove the watch from your wrist, no heart rate will be
displayed. However, the watch will continue to monitor your heart rate for a while.
The measurement will resume once you wear the watch again.
Your watch can measure your heart rate when you have connected it to your phone,
and started a workout via the Huawei Health app.
Open the Huawei Health app to view the heart rate graph for each workout,
maximum heart rate, or your average heart rate.
High heart rate alert
If you are resting or sleeping and your heart rate has exceeded the limit for 10 consecutive
minutes, your watch will vibrate once and display a message letting you know that your
heart rate is too high. You can swipe right on the screen or press the side button to clear the
message. Perform the following to set your high heart rate limit:
1Open the Huawei Health app, go to the device settings screen, then touch Health
monitoring > Continuous heart rate monitoring, then enable Continuous heart rate
monitoring.
2Touch High heart rate alert then set your preferred high heart rate.
You can set the high heart rate value to 100 bpm, 110 bpm, 120 bpm, 130 bpm, 140
bpm, or 150 bpm.
Low heart rate alert
If you haven't been resting or sleeping for the past 10 minutes and your heart rate stays
below the limit over 10 minutes, the device will vibrate once and display a message letting
you know that your heart rate is too low. You can swipe right on the screen or press the side
button to clear the message.
Perform the following to set an alert for low resting heart rates:
1Open the Huawei Health app, touch Devices then your device name, go to Health
monitoring > Continuous heart rate monitoring, and enable Continuous heart rate
monitoring.
2Touch Low heart rate alert and set a limit.
You can set the low heart rate value to the following: 40 bpm, 45 bpm, or 50 bpm.
Testing stress levels
To perform a stress test, open the Huawei Health app, touch Devices then your device name,
go to Health monitoring > Automatic stress test, and enable Automatic stress test.
Health management
12
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Huawei Band 6 - FRA-B29 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Huawei Band 6 - FRA-B29

Huawei Band 6 - FRA-B29 Kurzanleitung - Englisch, Französisch, Portugiesisch, Spanisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info