Bedienungsanleitung Huawei WS325 (Seite 71 von 74) (Englisch)

647686

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

8 FAQs

WS325 300Mbps Wireless Router

User Guide

8-2 Issue 01 (2012-10-26)

the WPS function is forcibly disabled if the WEP encryption is used for accessing a

wireless network.

Step 3

Ensure that the security mode of the WLAN is set to

WPA-PSK

WPA2-PSK

and the

SSID is set to

SSID1

. Note that the WPS function of the router is forcibly disabled if the

WEP encryption is used for accessing a WLAN.

Step 4

Check the positions of the wireless router and the PCs. Ensure that they are far from

electrical appliances, such as a microwave oven, a refrigerator, or a cordless telephone,

that generate strong magnetic or electric fields.

Step 5

It is recommended that you place the router and the PC in an open space. Although radio

signals can pass through obstacles, passing through too many obstacles such as cement

or wooden walls can affect the transmission of radio signals of a WLAN.

----End

Q 6: What can I do if I cannot access the Internet through a wireless

network adapter?

Step 1

Check whether the router's WLAN indicator is on.

If the WLAN indicator is off, the WLAN function of the router is disabled. Log in to the

web management page, choose Basic > WLAN, and select Enable WLAN.

Step 2

Check that the WLAN function is enabled on the computer. A computer running

Windows 7 is used as an example: Right-click

My Computer

, and choose

Manage

Services and Applications

Services

, and check whether

WLAN AutoConfig

Started

If not, right-click

WLAN AutoConfig

, and choose

Start

The following procedure describes how to change the parameter settings as required. You can

retain the default settings of the parameters that do not need to be changed.

Step 3

Check that the driver for the wireless network adapter is properly installed and the

network adapter is enabled. A computer running Windows 7 is used as an example.

Right-click

My Computer

, and choose

Properties

Device Manager

Network

adapters

to check the network adapter status.



If the wireless network adapter driver is installed and the network adapter is enabled,

a green icon is displayed next to it.



If the wireless network adapter is disabled, a red X is displayed next to it. To enable

the network adapter, right-click it and choose Enable.



If the network adapter driver is not properly installed, a question mark or

exclamation mark is displayed. In this case, re-install the network adapter driver.



If no network adapter is found, right-click any icon, and choose Scan for hardware

changes.

Step 4

Place the router close to the computer, and make sure that there are no obstacles, such as

concrete or wooden walls, between them.

Step 5

Go to the wireless network connection list to check whether the computer is connected to

the wireless network set up by the router.

Step 6

Try to access multiple Web sites to check whether the router can access other Web sites.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Huawei WS325 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info