565072
9
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
English 9
This increases both the reliability and
the range of the system.
Setting up the system –
1. Inserting the battery
There is a battery compartment on
the back of the
RF baby cry transmit-
ter
. Open it by your thumb, with sli-
ding the cover of the battery com-
partment to the right of the receiver.
Connect a 9 V block battery to the
connector plug, place the battery
into the recess and close the recei ver
again. When the battery is connec-
ted, the receiving signals may be
triggered once.
2.
Setting the correct radio channel
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to set
10 different radio channels.
When supplied from the factory, all
RF baby cry transmitters
are set to
channel 0.
Congratulations on buying your
RF
baby cry transmitter
. We hope that
you get many years of enjoyment out
of it. Please read the operating
instructions through carefully to be
able to start the unit correctly and to
familiarise yourself with all of the
systems features.
Standard components
Please check if all following compo-
nents are included:
-
lisa RF baby cry transmitter
- 9 V block battery
- 9 V plug-in PSU
- Stand
- Operating Instructions
- Warranty card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
Components not included
External microphone.
Functional principle
A signalling system consists of at
least one transmitter and one recei-
ver. The
RF baby cry transmitter
records the sounds a baby makes
via a microphone. It converts these
signals into radio pulses (868.35
MHz) and transmits them to the
receiver without the need of wires.
Special features
When a signal is detected, it is trans-
mitted for a total of 22 seconds.
Funk_Babysender_1008:BA_Funk_Babysend_0507 08.10.2008 11:38 Se
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HUMANTECHNIK A-2468-0 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info