Bedienungsanleitung HUMANTECHNIK Scalla 3 combo (Seite 36 von 44) (Englisch)

554051

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

36 English

Additional functions (MT)

The delivered mobile unit is already regis-

tered with the Base. It is registered as mo-

bile unit 1. Each additional mobile unit that

you purchase must rst be registered with

the Base station.

Up to 5 mobile units can be registered with

the Base station. Internal calls between mo-

bile units are possible. Incoming calls can

be transferred to other mobile units.

Up to 4 Base stations can be registered

with each mobile unit. This increases the

range of the phone, which means that you

can move between the phone transmission

ranges.

Please follow the instructions to register a

new mobile unit:

1. Press the search key on the Base for

app. 5 seconds. The remaining process

will be completed on the mobile unit.

2. Press the "Menu" key and select the

"Registration" entry with .

3. Press "Select".

4. Select the desired base with and con-

rm with "Select". The Base station will

now be searched and the mobile unit will

be registered.

5. Enter the PIN code (default is 0000).

6. A registration tone sounds if the PIN

code is accepted and the Base assigns a

number to the mobile unit. A warning ton

sounds if the PIN code is wrong and the

module returns to the previous registra-

tion status. You can enter the PIN code

again.

Internal calls

You can conduct internal calls or transfer ex-

ternal calls between mobile units if several

mobile units are registered to one base.

Please follow the instructions to conduct an

internal call:

1. Press the key at the mobile unit.

2. Enter the desired mobile number be-

tween 1 and 5.

Dialing 9 means that all mobile units will

be called. The mobile unit issues a warn-

ing tone if you enter a wrong number.

The number of the calling mobile unit will

be shown on the display if you receive an

internal call.

Call connections between mobile units

An internal call can be transferred from one

mobile unit to another.

Follow the steps:

1. Press the key at the mobile unit

during a call. The external caller will be

put into a waiting loop.

2. Enter the desired mobile number between

1 and 5.

3. The dialed mobile unit will ring. The name

of the dialing mobile unit will be shown on

the display.

4. Receive the call with .

5. If desired, a conversation with the dialed

user can take place. You can also hang

up before the user picks up. In this case

the call will be directly re-directed.

6. Press the key to end the call, the

caller in the waiting loop will now be trans-

ferred automatically to the other caller.

If you want to cancel the transfer, press

the key again and now you can talk

again to the external caller.

The call will be transferred back if the dialed

mobile units does not answer within a cer-

tain time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HUMANTECHNIK Scalla 3 combo Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HUMANTECHNIK Scalla 3 combo

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info