Bedienungsanleitung Humax HMS-1000T (Seite 3 von 38) (Englisch)

604918

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

GB2

For Your Safety

Safety Instructions

1. POWER SUPPLY

• Operatethisproductonlyfromthetypeofpower

supply shown on the marking label. If you do not

know the type of power supplied to your home,

contact your local power company.

• Disconnectthepowersupplybeforeyoustart

any maintenance or installation procedures.

2. OVERLOADING

• Makesurethatthewalloutlet,extensioncord

and adapter have a suﬃcient power rating for the

appliance. If not, this can cause an electric ﬁre

shock.

3. LIQUID

• Donotexposethisproducttoliquids.Donotput

objects ﬁlled with liquid on the product.

4. CLEANING

• Disconnecttheproductfromthewalloutlet

before you clean it.

• Useamoistclothtocleantheproduct.Donot

use solvents. Wipe the surface gently with a soft

cloth as it may get scratched.

5. VENTILATION

• Makesurethattheslotsontopoftheproductare

not blocked. It is necessary to have a suﬃcient

airﬂow into the unit.

• Donotputelectronicequipmentontheproduct.

• Donotputobjectsontheproduct.Thiswillblock

the ventilation or cause damage to the surface.

6. ATTACHMENTS

• Donotuseanyunsupportedattachmentsas

these may be hazardous or cause damage to the

product.

7. LIGHTNING, STORM OR NOT IN USE

• Unplugtheproductfromthewalloutletand

disconnect the antenna during a thunderstorm

or when left unattended and unused for long

periods of time. This will prevent damage to the

unit due to lightning and power-surges.

8. EXTRANEOUS OBJECTS

• Donotinsertanythingthroughtheopenings

in the unit, where they can touch dangerous

voltage points or damage parts.

9. REPLACEMENT OF PARTS

• Whenreplacementofpartsisrequired,besure

the service technician uses replacement parts

speciﬁed by the manufacturer or those that

have the same characteristics as the original

part. Unauthorised substitution may result in

additional damage to the unit.

10. CONNECTION TO THE SATELLITE DISH LNB/CABLE TV

SIGNAL/AERIAL

• Disconnectthepowersupplybeforeyouconnect

or disconnect the cable from the satellite dish/

cable TV signal/aerial. If not, this can cause

damage to the LNB/cable TV line/aerial.

11. CONNECTION TO THE TV

• Disconnectthepowersupplybeforeyou

connect or disconnect the cable from the TV.

If not, this can cause damage to the TV.

12. EARTHING (satellite only)

• EarththeLNBcabletothesystemearthfor

the satellite dish.

13. LOCATION

• Placetheproductindoorstoavoidexposure

to lightning, rain or sun. Do not place it near a

radiator or heat register.

• Keepatleast10cmclearancefromanyother

appliances susceptible to electromagnetic

inﬂuences such as a TV or a VCR.

• Ifyouplacetheproductonarackora

bookcase, make sure that there is adequate

ventilation and that you have followed the

manufacturer’s instructions for mounting.

• Donotplacetheproductonanunstable

surface where it can fall. A falling product can

cause serious injury to a personnel and serious

damage to the appliance.

14. Environment

• Attentionshouldbedrawntothe

environmental aspects of battery disposal.

• Careisrequiredfortheuseofthisapparatusin

tropical and/or moderate climates.

Cautions and Warnings

1. To avoid damage of the power cord or plug

• Donotmodifyorprocessthepowercordorplug

arbitrarily.

• Donotbendortwistthepowercord.

• Makesuretodisconnectthepowercordwhile

you hold the plug.

• Keepheatingappliancesasfaraspossiblefrom

the power cord to prevent the cover vinyl from

melting.

• Themainsplug,asadisconnectiondevice,shall

remain readily accessible by the user.

• All-polemainswitchshallremainreadily

operable. (For products with power switch)

2. To avoid electrical shock

• Donotopenthemainbody.

• Donotinsertmetalorinammableobjectsinside

the product.

• Donottouchthepowerplugwithwethands.

• Disconnectthepowercordincaseoflightning.

• Unplugthepowercablebeforeyouinstallthe

antenna cable.

3. To avoid damage of product

• Donotusetheproductwhenitisoutoforder.If

you continue to use the product when defective,

this may cause serious damage. Make sure

to contact the customer service centre if the

product is out of order.

• Donotinsertmetaloraliensubstanceintothe

slots for the modules or Smartcards. It may cause

damage to the product and reduce its life span.

4. To avoid damage of the hard disk drive (PVR only)

• Donotmovetheproductorturnthepowero

suddenly while the hard disk drive is running.

• Thecompanyshallnotbeliableforany

corruption of data on the hard disk drive

caused by carelessness or misuse of the user.

Humax HMS-1000T Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info