Bedienungsanleitung Humminbird 100SX (Seite 27 von 30) (Englisch)

522281

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

offered by Busse-Yachtshop.com

To return to "Automatic" Depth Range control, press the MENU

button until the Depth Range menu appears on-screen and use

the UP ARROW to select AUTO. The 100SX returns to Automatic

operation.

Zoom

Zoom is similar to Depth Range in that it controls the range of

information displayed in the graphics area of the display. Zoom,

however, allows selection of ranges beneath the surface so any

area of water between the surface and the bottom can be enlarged to provide more detailed

information. By using the full display to show a small area of coverage, the effective display

resolution is increased, and the unit's ability to separate targets which are very close together is

enhanced.

There are four Zoom ranges available: 7 1/2' (2m), 15' (5m),

30' (10m), and 60' (20m). These ranges are not directly user

controlled but are instead dependent on the current depth

range. In shallow water, when the 15' (5m) or 30' (10m)

range is in use, the Zoom range is 7 1/2' (2m). If the 60'

(20m) or 120' (40m) range is in use, the Zoom range is 15'

(5m), if a 180'480' (60-150m) depth range is in use, the

Zoom range is 30' (10m), and if the 600' (185m) range is in

use, the Zoom range is 60' (20m).

The 100SX shows Zoom range in conjunction with the full

depth range. The Zoom range is shown on the left side of

the screen and full range information is shown on the right

side of the display. Zoom can either operate automatically,

in which the Zoom range is constantly adjusted to show the

bottom, or manually, in which the user controls the location

of the Zoom range.

"Automatic" Zoom is especially helpful when looking for

structure or bottom detail. The "Automatic" Zoom keeps the

bottom in view even in quickly changing terrain. "Manual" Zoom provides detailed information of

any area from the surface to the bottom. In "Manual" Zoom, the Zoom range does not move as

the terrain changes.

To operate Zoom, Press MENU repeatedly until the Zoom menu is on-

screen. Three options are available: "Off" (Factory Setting), "Auto"

(Automatic bottom tracking Zoom), and "Manual" (User controlled Zoom

range). Press the DOWN ARROW once to highlight Auto. When the

menu disappears, the graphics area of the screen will be divided in half.

Full range information on the right, Zoom information on the left. The

digital depth readout is unaffected by Zoom.

Pressing the DOWN ARROW again to highlight "Manual" activates Manual Zoom. The menu

further expands to show the current Zoom range, and allows user adjustment of this range.

When the range is shown in the menu, the upper number represents the top of the current Zoom

range. The lower number represents the bottom of the Zoom range. The UP and DOWN ARROW

buttons can be used to move this range. The upper number can never be less than 0 (the surface

of the water), and the lower number can never be greater than the active depth range. The

difference between the two numbers (the Zoom range) is preset and determined by the active

depth range.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Humminbird 100SX Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info