Active Side
(1197c SI Combo models only)
Active Side allows you to select which side of a Combo View will be active; key presses will only affect
the active side of the screen. When a menu is displayed, the non-active side of the screen will be grayed
out; at any other time, a green arrow will point to the active side. Combo Views usually display sonar on
the left, with charts or Bird’s Eye usually on the right. The Active Side menu choice is only available when
a Combo View is active.
To select the Active Side:
1. Highlight Active Side on the Side Imaging X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to change which side is active. (Left, Right, Default =
Left, or Sonar).
Split Position
(1197c SI Combo models only)
Split Position allows you to adjust what percentage of the screen is taken up by the left side of any Combo
View; each view may be adjusted independently; you must be in a specific view to adjust the screen size
for that view. The number setting indicates the percentage taken up by the left side of the Combo View;
selecting Left sets the left side of the screen to its smallest setting. The Split Position menu choice is only
available when a Combo View is active.
To Adjust Split Screen Position:
1. Highlight Split Position on the Side Imaging X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to change the size of the left side of a split screen.
(Left,30, 40, 50, 60, 70, Right, Default varies)
SI Side
(1197c SI Combo models only)
SI Side sets which transducer beam from the SI beams will be shown on the display.
To Adjust SI Side:
1. Highlight SI Side on the Side Imaging X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to select the transducer beam (Left, Both, Right,
Default = Both)
117
