Bedienungsanleitung Humminbird 450TX (Seite 26 von 35) (Englisch)

522288

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

offered by Busse-Yachtshop.com

Range, Depth Alarm and Zoom. See the detailed description of each function for further

explanation.

Menu Functions

Sensitivity. The Sensitivity function controls the sensitivity of the sonar

receiver. The 400TX automatically adjusts the level of receiver

sensitivity based on a number of factors including the depth of the

water and the level of noise present. Noise can be caused by other

electronic devices, engines, trolling motors, propeller cavitation and

hydrodynamic flow among others.

The user has the option of adjusting the Sensitivity higher or lower based on personal preference.

You can select one of 11 sensitivity settings from -5 to +5. A setting of 0 (factory setting) has no

effect on the automatic sensitivity control. Increasing the sensitivity (+1 through +5) enables the

unit to display the information from progressively smaller sonar returns. By decreasing the

sensitivity (-1 through -5), the unit effectively filters small sonar returns.

In murky or muddy water, it is often helpful to reduce the sensitivity. This prevents the display

from being cluttered with sonar returns from debris

or suspended particles. In very clear or very deep water, it may be helpful to increase the

sensitivity since even the smallest sonar return may be of interest to the user.

To adjust Sensitivity, press MENU repeatedly until

the Sensitivity heading is displayed. When the

Sensitivity menu appears, use the UP ARROW to

increase the sensitivity, or the DOWN ARROW to

reduce sensitivity. To sequence through the

available settings, press and hold either ARROW

button. Release the button at the setting you want to

select.

After an adjustment is made, the menu disappears

and the new sensitivity setting is in affect. If

additional time is needed to study a menu, press and

hold the MENU button and the menu will remain

onscreen indefinitely. If you need to make an

additional adjustment, press the UP ARROW or

DOWN ARROW button.

Depth Range. The Depth Range function controls the vertical

distance displayed on the graphic area of the display. There are nine

depth ranges available. The top of the range is always 0, or the

surface of the water. Ranges of 0-15', 0-30', 0-60', 0-120', 0-180', 0-

240', 0360', 0-480', and 0-600' are available. In the metric version,

ranges of 0-5, 0-10, 0-20, 0-40, 0-60, 0-80, 0-110, 0-150, and 0-185

meters are available. The range that positions the bottom depiction

closest to the bottom of the screen, will best utilize the available

display resolution.

The 400TX automatically adjusts the depth range depending on the

depth of the water. The unit tries to maintain the bottom depiction

about 2/3 down the total range (for example, in 20' (6m) of water, the

0-30' (0-10m) range would be selected). This provides the best

display resolution and therefore the best target separation possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Humminbird 450TX Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info