50
Side Beam Range
(WideSide® transducer: WideSide® View only)
Side Beam Range sets the deepest range that will be displayed in the
WideSide® View. The range must be set manually to keep the bottom visible on
the display. If the Side Beam Range is set too deep for current depth conditions,
the sonar information will become compressed on the display and valuable
detail will be lost.
A WideSide® transducer must be connected to the Fishing System. The Side
Beam Range option is available when Transducer Select is set to WideSide® (see
Sonar Menu Tab: Transducer Select) and can only be accessed from the Sonar
X-Press
™
Menu in the WideSide® View.
NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You
can visit our website at www.humminbird.com to order this accessory online or
contact our Customer Resource Center at 1-800-633-1468.
To adjust the Side Beam Range:
1. Make sure User Mode is set to Advanced and that WideSide® is
selected under the Sonar Menu Tab: Transducer Select setting.
2. From the WideSide® View, press the MENU key once to access the
Sonar X-Press™ Menu.
3. Highlight Side Beam Range, and press the RIGHT or LEFT Cursor keys
to increase or decrease the Side Beam Range setting. (6 - 160 feet
[2 - 50 meters] [International Models only], Default = 160 feet
[50 meters])
Sonar X-Press™ Menu
