Bedienungsanleitung Hunter ACC (Seite 28 von 100) (Englisch)

685907

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

CAUTION: Understand your irrigation system’s hydraulic

restrictions before allowing programs to overlap.

Overlapping programs may overdrive the hydraulics of

your system. Overdriving your hydraulics will damage the

components and result in inferior sprinkler performance.

More advanced programming overlap options are available

by turning the dial to the SET PROGRAM OVERLAP

OPTIONS dial position.

Normally, the cursor will be positioned at the first Start

Time hour position when turning the dial to the Set

Program Start Time position.

• To change the Stack/Overlap settings for the Program,

use the arrow key to navigate up to the Stack/Overlap

indication.

• Use + or – to change between Stack and Overlap.

• Use the arrow keys to move back down to the Start

Times if necessary.

Multiple Start Times

To set Start Times for the Program, move to the Start Time

number, and use the + or – buttons to set the hour, then

minutes, and then AM/PM settings unless using 24-hour

option.

• If a Start Time is skipped (for example, a time is set

for 1, 2 is left at OFF, and a time is set for 3), the Start

Time will be accepted, but when returning to this

dial position, the Start Times will be moved to a

sequential order (the Start Time set for 3 will have

been moved to 2). This is by design.

• If an earlier Start Time is set for a higher-numbered

Start (for example, Start 1 is set to 4:00 AM, and

Start 2 is set to 3:00 AM), when returning to this dial

position the Start Times will have been reorganized

in chronological order. The lowest numbered Start

Time will always have the earliest time of day (in the

example, Start 1 will be at 3:00 AM and Start 2 will be

at 4:00 AM).

Press the Information button while in the Set Watering

Start Times position to show a summary of all Start Time

information for the selected Program. This will show total

station run time per start, number of starts, and total time

for the program.

No-Water Window

Programming this feature is explained in the Extended

Features section.

SETTING STATION RUN TIME DURATION

Three items are programmed at this position:

• Station watering duration

• Seasonal Adjust value for the Program

• Hidden Feature: Timed Delay between Stations

1. Turn the dial to the SET STATION RUN TIMES position.

2. Select the Program (A – F) by pressing the Program

button

3. Press the + or – button to change the value of the

flashing cursor. The cursor initially appears in the

minutes field.

4. Press the right and left arrow buttons to change

from minutes to hours or seconds cursor positions.

Set the run time in h:mm:ss format.

5. Run times may be from 1 second to 6 hours, or any

increment in between.

6. Press the up and down arrow buttons to change to a

different station number

7. The copy and paste buttons may be used to speed up

programming.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hunter ACC Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hunter ACC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info