685866
9
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
CURRENT TIME/DAY
START TIMES
CURRENT TIME/DAY
7
PROGRAMMING THE CONTROLLER
The XC display shows the time and day when the controller is idle.
The display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flash-
ing portion of the display can be changed by pressing the
or
buttons. To change something that is not flashing, press the or
buttons until the desired field is flashing.
Three programs A, B, and C, each with the ability to have four daily
start times, permit plants with different watering requirements to be
separated on different day schedules.
NOTE: A basic programming rule is that whatever symbol
or character is flashing will be the item programmed. For
instance, if the hour isashing when setting the time, the
hour can be changed or programmed. For illustration pur-
poses in this manual, flashing characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the CURRENT TIME/DAY position.
2. The current year will be flashing. Use the or
buttons to change the year. After setting
the year, press the
button to proceed to
setting the month.
3. The month and day will be in the display.
The month will be flashing and the icon
will be displayed. Use the or buttons
to change the month. Press the
button to
proceed to setting the day.
4. The day will be flashing and the icon
will be displayed. Use the or buttons
to change the day. Press the
button to
proceed to setting the time.
5. The time will be displayed. Use the and
buttons to select AM, PM, or 24 hour.
Press the
button to move to hours. Hours
will be flashing. Use the and buttons
to change the hour shown on the display.
Press the
button to move to minute.
Minutes will be flashing. Use the and
buttons to change the minutes shown on the
display. The date, day, and time have now
been set.
Setting the Program Start Time(s)
1. Turn the dial to the START TIMES position.
2. The factory preset is set on program A. If
necessary, you can select program B, or C
by pressing the button.
3. Use the or button to change the
start time. (The start times advance in
15 minute increments).
4. Press the
button to add an additional start time, or button
for the next program.
NOTE: One start time will activate all stations sequential-
ly in that program. This eliminates the need to enter each
station’s start time. Multiple start times in a program
can be used for separate morning, afternoon, or evening
watering cycles. Start times may be entered in any order.
The XC will automatically sort them.
ENG
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hunter XC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hunter XC

Hunter XC Bedienungsanleitung - Deutsch - 17 seiten

Hunter XC Kurzanleitung - Holländisch - 1 seiten

Hunter XC Bedienungsanleitung - Holländisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info