Bedienungsanleitung Hurom H-200 Series (Seite 7 von 29) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

785969

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

Check the following before asking for repair. For follow-up service and any inquiry

you may have while using the product, please contact our Customer Center, or

homepage at http://www.globalhurom.com Check the manufacturer’s number or

the number under the barcode when requesting for follow-up service or parts.

10. Before

Requesting Repair

01. When the product starts

operation, it will make a "clicking"

sound.

02. The product won't operate with

the main body only.

03. Align the safety sensors.

04. The product does not work.

05. The product suddenly stops

running.

06. There are cracks on the screw

and scratch marks on the upper

part of the screw.

07. Juice leaks through the pulp

outlet immediately upon inserting

ingredients.

08. Juice flows back into the

hopper.

09. Juice leaks between the hopper

and the chamber, or between the

chamber and the main body.

10. I can't open the hopper.

11. The chamber is vibrating

(during juicing).

12. Pulp outlet is covered, but the

pulp comes out.

This is the sound of when the motor and the squeezing screw are connected.

and not a sign of malfunction.

Make sure the chamber set and main body are assembled properly.

Ensure the product is unplugged before assembling or disassembling it.

Make sure they are assembled in accordance with the assembly guide.

Ensure the product is unplugged before assembling or disassembling it.

Check if the power cord is plugged properly.

The machine may not work after prolonged use (30 minutes or longer).

It will resume normal operation once the main body (motor) cools down.

Check if the hopper fits properly.

If the hopper is connected incorrectly, the product will not operate properly.

It will operate only when the lock symbol on the chamber is perfectly aligned

with the assembly guide on the hopper (②-3). Ensure the product is assembled

in accordance with the assembly guide. Refer to the assembly page 8 of the

instruction manual.

Is the hopper overloaded with juicing ingredients, or are the ingredients too big?

Refer to the manual page 11, and activate reverse rotation.

In addition to the straight molding marks on the top and sides of the screw, there

are curved marks that were created while it was being molded.

These marks are normal and they have no impact on your use of the screw.

A little juice may come out of the pulp outlet depending on the ingredient.

This is not a product defect but the result of the characteristics of the ingredient.

The leakage will stop once the product starts running. If the leakage persists,

contact our Customer Service Center.

Did you operate the product with the juice cap closed? Closure of the juice cap

may cause a back flow up to the hopper. If the flow gets clogged even after opening

the juice cap, open the hopper lid and empty out the inside.

Is the hopper silicone ring assembled correctly?

Juice will leak if the chamber silicone ring has been assembled upside down or

incompletely. Check if the silicon rings have been assembled correctly.

There may be excessive pulp remaining inside. If the remaining pulp is discharged

by turning on the machine, or the machine is rotated in reverse for 10 seconds two

or three times, the hopper will open smoothly.

Perhaps you put foreign or solid substances (hard seeds such as persimmon

seeds)? If you have put foreign or solid substances, attempting to run the product

in reverse direction may further damage the component. Thus, contact our

Customer Service Center and request after-sales support.

The product may wobble slightly due to the vibrations produced by the main

body's motor. It may vibrate depending on the ingredient's hardness or toughness.

This is not a malfunction but a normal sign as it is caused by the rotating screw.

The product may seem to vibrate more when juicing solid ingredients (e.g.,

carrots, potatoes, radishes, beets, or kohlrabies) than when juicing soft and

watery ingredients. (e.g., carrot. potato, radish, beet, kohlrabi, etc)

Even if the lever is closed, pulp may still come out naturally.

The velocity and amount of pulp discharge may differ according to the ingredients

used.

English

4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 13 2020-06-12 오전 9:46:37

9. How to Disassemble and Clean

After the product stop operating completely,

unplug the power cord with your dry hands.

The motor is still slowing down after the

appliance is turned off, so wait about 3 seconds

before separating the chamber.

Separate the chamber set from the base. Turn

the hopper open and pull off the parts in order.

Wash the parts under running water with the

cleaning brush.

Wash the chamber with the pulp outlet cover

and the juice cap wide open.

Wipe the base with a dry towel or soft cloth.

For silicon rings, detach and wash them after

use. -There may be juice residues stuck in.

(Hopper ring, juice cap, extraction cap, sealing,

and chamber ring)

You can sterilize the parts by soaking them in

warm water with baking soda, citric acid, or

vinegar.

※ Failure to clean the product right after use can cause

its stainless steel components and other parts to corrode

or discolor due to salt and pulp of the ingredients. In

addition, contaminants may dry up and get stuck inside

the product, making disassembly or cleaning difficult

or adversely affecting the product's performance. Be

sure to clean and air dry the appliance completely after

use and store it at a clean place. For long-term storage,

clean the appliance with the cleaning brush in advance.

Do not clean the product with boiling water or subject it to

high temperature. Do not use abrasive cleaning tool like

kitchen sink cleaner, or stainless-steel sponge. Do not

use a dishwasher or dish dryer for the product.

※

4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 12 2020-06-12 오전 9:46:37

Hurom H-200 Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hurom H-200 Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info