Bedienungsanleitung Hurom H-300E Series (Seite 10 von 13) (Englisch)

785966

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

정회전

역회전

정지상태

작동스위치 정회전

역회전

off(정지) 정지

정회전

역회전

정지상태

작동스위치 정회전

역회전

off(정지) 정지

01 Open the hopper cover.

① Press the lever of the hopper cover to open it.

Insertion of an excessive amount of ingredients may

damage the product.

02 Add ingredients only up to the limit mark of the

hopper.

① For soft ingredients, mixing them with other ingredients

for extraction.

03 Close the hopper cover and keep the juice cap open.

① Before pressing the power switch, place the juice

container and pulp container first.

② The juice may flow backwards into the hopper if the juice

cap is closed during extraction. If the juice does not come

out even after opening the juice cap, open the hopper cover

and empty out the contents.

③ When the hopper cover is closed, the white lamp is lit.

04 Press the power switch briefly to start operation.

① The "click" sound during the operation of the product is

the sound of the chamber set and the motor being locked

together.

② During operation, the white lamp blinks on the power

switch part.

③ If the Multi-screw stops during operation, the product

automatically rotates in reverse but, if the power is

unstable, the reverse rotation may not work. In such a case,

press the power switch for over 1 second to activate the

reverse rotation and then press the power switch again

briefly to activate.

④ A timer, which automatically stops after about 5 minutes

from the start of operation, is set. If the power switch is

controlled during operation or the hopper cover is opened

and then closed, which pauses and then restarts the

machine, the timer is reset to 5 minutes again.

05 To add more ingredients during operation, use the

additional inlet or open the hopper cover.

① When the hopper cover is opened, the operation stops.

② Do not use anything other than the designated pusher.

③ In case the Multi-screw spins but the ingredients fail to

be ground in the hopper during extraction, use the pusher

to press the ingredients down.

06 Empty out the pulp container and juice container so

that they are not filled up.

07 Let the machine operate for about 1 more minute after

all ingredients go down in the hopper.

① It slowly presses and squeezes the ingredients so it

takes some time until the last ingredient is juiced.

② Removing the remaining pulp by additionally operating

the machine after extraction makes it more convenient to

detach the hopper and clean the parts.

08 Once the juicing and pulp removal are finished, press

the power switch to stop the machine.

① The machine stops 3 seconds after it is stopped by the

power switch.

09 Pour any remaining juice by tilting the chamber

forward.

① For thickly concentrated juice made of tomatoes, etc., the

juice may still remain in the chamber.

01 If the Multi-screw stops during operation, the

product automatically rotates in reverse and then

goes into a normal operation. But, if the power

is unstable, the reverse rotation may not work.

In such a case, press the power switch for over 1

second to activate a reverse rotation. The reverse

rotation is a function that returns the ingredients

upward. It only works while the power switch is

pressed and, once you lift your finger from the switch,

the Multi-screw stops rotating.

02 After the Multi-screw is completely stopped after

a reverse rotation, press the power switch briefly

to start the operation again. When operating the

extraction or reverse rotation function, make sure

to press the power switch after the Multi-screw has

completely stopped moving.

Note

If the machine does not work even after following the

above steps, pull the power cord plug from the outlet,

detach the chamber set, wash it and use it again. Due

to its characteristics, the motor will not stop at once

but, instead, continue to spin slowly in the direction of

operation before coming to a complete stop.

8. When Multi-screw Stops

During Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hurom H-300E Series Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info