Bedienungsanleitung Hurom H320N Series (Seite 6 von 29) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

785960

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

Press and hold [REV] button for 3 to 5

seconds and release the button 2 to 3 times.

[REV] button pushes the ingredients back up to

dislodge. Reverse rotation continues only when

the button is pressed while the screw stops

when the button is released.

After reverse rotation stops completely,

press the [ON] button to run operation.

When pressing the [ON/Extract] or [REV/

Reverse] button, make sure to press it after the

screw stops moving completely.

Precautions

If the juicer does not work after these steps,

unplug the appliance, and disassemble and

clean the parts before operating the juicer

again.

The motor will continue to spin after the

machine is turned off, but it will slow down and

come to a complete halt.

8. When the squeezing screw stops

during normal operation

01 Pull up the lever inside the hopper knob and open

the lid.

① Pull up the lever inside the hopper knob, and open

the lid. Overloading the product with ingredients may

damage the product.

02 Insert juicing ingredients below the limit mark of

the hopper.

① Use watery soft ingredients after mixing them with

others.

② When juicing in bulk, empty out the chamber and

the pulp container frequently.

03 Close the hopper lid, and keep the juice cap open.

① Before pressing the ON button, put the juice

container in place.

② The juice can flow backwards intothe hopper if the

juice cap is closed. If the juice doesn't empty even after

opening the juice cap, open the hopper lid and remove

the contents.

04 Press the [ON] button to start operation.

① "Clicking" sound upon starting is made when the

chamber set fits with the motor.

05 If you want to add more ingredients during

operation, use the add door on the top or open up the

hopper lid.

① Operation stops when the hopper lid is open.

② Do not use any other voltages other than the

designated one.

③ When the screw spins and the ingredients are

not being ground, use the pusher to push down

ingredients.

06 Empty out the pulp container behind the base

frequently in order to prevent the back of the product

to become full with wastes.

07 Let the product run for another minute or so after

the last ingredient goes down through the hopper.

① It takes some time for the last piece to be extracted

as it is pressed down the product slowly.

② Run the appliance after the extraction to send out

residual pulp, and it will be easier to disassemble and

clean the hopper.

08 Once the extraction and release of residue is

done, switch off the juicer.

① The juicer stops 3 seconds after it is switched off.

09 Pour any juice left in the product by tilting the

chamber set forward.

① For thick juice like tomato juice, it is likely to pool in

the chamber set.

누름

정회전

역회전

작동스위치 정회전

역회전

누름

정회전

역회전

작동스위치 정회전

역회전

정회전

역회전

정지상태

작동스위치 정회전

역회전

off(정지) 정지

4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 11 2020-06-12 오전 9:46:35

7. How to operate

정회전

역회전

정지상태

작동스위치정회전

역회전

off(정지)정지

01 0302

누름정회전

역회전

작동스위치 정회전

역회전

누름

정회전

역회전

작동스위치 정회전

역회전

정회전

역회전

정지상태

작동스위치 정회전

역회전

off(정지) 정지

4DC010797 사용설명서 통합 H200 Serise 유럽,미국(en,de,fr,es,it,ru,po)_V.02.indd 10 2020-06-12 오전 9:46:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hurom H320N Series Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hurom H320N Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info