807024
8
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
07
5. Power Switch and Jog Dial Guide
OPERATE
- It works when the [START/STOP] button is
briefly pressed in the Standby Mode.
- It is used when activating the product for
juicing.
- It is automatically terminated and switched to
the Standby Mode after 5 minutes elapse from
the start of the operation. If the chamber cover
is opened and then closed during operation for
additional insertion of ingredients, the timer is
reset.
* If the hopper cover is opened during operation,
the product stops. If the hopper cover is
closed again within 60 seconds, the operation
continues. But, if 60 seconds elapse, the
operation automatically stops and it switches to
the Standby (stop) state.
STOP
- This is used to stop the product's operation.
- The product stops when the [START/STOP]
button is briefly pressed in the operation state.
* If the chamber set is not installed, all lamps
are turned off.
* When 1 minute has elapsed from the Standby
(stop) state, the product enters the power
saving mode (light turned off). If the [START/
STOP] button is pressed or the chamber
set is assembled, the power saving mode is
deactivated and it switches to the Standby (stop)
state.
REVERSE ROTATION
- This is used when the operation pauses or
a reverse rotation is needed due to excessive
insertion of ingredients during extraction.
* It works only when the [START/STOP] button
is pressed for over 1 second, and it stops when
the switch is released.
* If the screw stops during extraction, the
product automatically rotates in reverse but, if
the power is unstable, the reverse rotation may
not work. In such a case, press the [START/
STOP] button for over 1 second to activate a
reverse rotation and then press the [START/
STOP] button again briefly to activate.
Manual Mode 01
Turn the jog dial clockwise to operate the device
at a desired speed.
Once cooking finishes, return the jog dial to the
[ Power Display Lamp ] position.
* The motor stops automatically after max.
1 minute of operation.
Manual Mode 02 (Pulse Mode)
While the [START/STOP] button is pressed,
the motor operates at the maximum speed.
Once the button is released, the operation stops
and it switches to the Standby (stop) state.
* The motor stops automatically after max.
1 minute of operation.
When you turn the jog dial in Auto Mode
the LED of the desired program mode is lit and,
once the [START/STOP] button is pressed,
the selected [Auto Mode] begins.
Once cooking finishes, the operation stops
automatically.
To stop the operation, return the jog dial to the
Power Display Lamp position or press the
[START/STOP] button, which cancels the
operation and switches to the Standby Mode.
< Juicer Standby Mode (container present) > < Blender Standby Mode (container present) >
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hurom M100 Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info