Bedienungsanleitung Hurom Serie H310A (Seite 10 von 13) (Englisch)

785963

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

01 Open the hopper cover.

① Pull the lever of the hopper cover to open it.

02 Add the juicing ingredients below the limit

mark of the hopper.

① Use soft ingredients by mixing them with

others.

※ Overloading the product with ingredients may

damage the product.

03 Close the hopper cover and keep the juice cap

open.

① Before pressing the extraction button, put a

cup in place first.

② The juice can flow backwards into the hopper

if the juice cap is closed. If the juice does not

come out even after opening the juice cap, then

open the hopper cover and remove the content.

04 Turn the power dial [ON] to start operation.

① The "click" sound when the product is operating

is the sound of the chamber set and the motor

binding together.

※ Operation stops when the hopper cover is open.

05 During extraction, ingredients may get

stuck on the interior wall of the hopper or

cutting blades.

① Turn the dial to the [REV] direction for 3 to 5

seconds to activate the reverse operation. Then,

turn the dial again to the [ON] direction.※If the

movement of ingredients is not smooth, open

the hopper cover and organize the ingredients.

06 Let it operate for another minute or so after

the last ingredient goes down through the

hopper.

① It takes some time for the last piece to be juiced

as it slowly squeezes the ingredients.

② If the remaining pulp is removed by additionally

running the machine after extraction, then it

should be quite easy to remove the hopper and

wash the parts.

07 Once the juicing and pulp removal are done,

stop the product by turning the power dial.

① Even when it is stopped by the power switch,

the operation may stop after 3 seconds.

08 Pour any juice left by tilting the chamber set

forward.

① For thick juice like tomato juice, it is likely to

pool in the chamber set.

8. When the Screw Stops during

Operation

01 For 2 to 3 times, repeat the process

of maintaining the state in which the

power dial is turned to the [REV] direction

(counterclockwise) for 3 to 5 seconds and

then releasing the dial. The reverse rotation

is a function that returns and lifts the

ingredients upward. It only works when the

dial is being turned, and the screw rotation

stops when the dial is released.

02 󾖴󾖴󾖴󾖴󾖴󾖴

󾖴󾖴󾖺󾖴󾖴󾖴󾖴

󾖴󾖴󾖴󾗁󾗂󾖴󾖴󾖸󾖹󾖴󾖴

󾖴󾖴󾖴󾖼

Note

If it does not work even after following the

above steps, unplug the power cord from the

outlet, remove the chamber set, wash it, and

use it again.

The motor will continue to spin after the

machine is turned off but it will slow down

and come to a complete halt.

REV ON

OFF

REV ON

OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hurom Serie H310A Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hurom Serie H310A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info