Bedienungsanleitung Husqvarna 115iHD45 (Seite 12 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

733988

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Maintenance Before

use

Weekly Monthly

Clean the external parts of the product. X

Examine that the start and stop switch works correctly and is not damaged. X

Make sure that the power trigger and the power trigger lockout function correctly

from a safety point of view.

Make sure that all controls work and are not damaged. X

Make sure that the cutter blade and cutter guard have no cracks and that they

are not damaged. Replace the cutter blade or the cutter guard if they have

cracks or if they have been exposed to impact.

Replace the cutter blade if it is bent or damaged. X

Make sure that the hand guard is not damaged. Replace the guard if it is dam-

aged.

Make sure that the screws and nuts are tight. X

Make sure that the battery is not damaged. X

Make sure that the battery is charged. X

Make sure that the battery charger is not damaged. X

Make sure that the screws that hold the cutter blades together are correctly tight-

ened.

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger.

To examine the battery and the battery

charger

1. Examine the battery for damages, for example

cracks.

2. Examine the battery charger for damages, for

example cracks.

3. Make sure that the connection cord of the battery

charger is not damaged and that there are no cracks

in it.

To clean the product, the battery and

the battery charger

1. Clean the product with a dry cloth after use.

2. Clean the battery and battery charger with a dry

cloth. Keep the battery guide tracks clean.

3. Make sure that the terminals on the battery and the

battery charger are clean before the battery is put in

the battery charger or the product.

To examine the cutter blade

1. Clean the cutter blades from unwanted materials

with an anti corrosion cleaning agent before and

after you use the product.

2. Examine the edges of the cutter blade for damages

and deformation.

3. Use a file to remove burrs on the cutter blade.

4. Make sure that the cutter blades move freely.

To clean and lubricate the blades

1. Clean the blades from unwanted materials before

and after you use the product.

2. Lubricate the blades before long periods of storage.

Note: Speak to your servicing dealer for more

information about recommended cleaning agents and

lubricants.

To lubricate the gear

Apply grease to the gear housing if the gear has been

disassembled by an approved servicing dealer.

• Use Husqvarna special grease. Speak to your

servicing dealer for more information about

recommended grease.

• Only use a small quantity of a special high quality

grease.

12 779 - 004 - 15.07.2020

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 115iHD45 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info