6
English
Safety
Warning labels on the machine
SYMBOLS
If warning label peel off or become soiled and impossible
to read, you should contact the dealer from which you
purchased the product to order new labels and affix
them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled
hedge-trimmer or you don’t observe the proper usage
written in the manual.
SAFETY FIRST
Instructions contained in warnings within this manual
and warning seals marked with a
symbol on the
blower concern critical points which must be taken into
consideration to prevent possible serious bodily injury,
and for this reason you are requested to read all such
instructions carefully and follow them without fail.
WARNINGS IN THE MANUAL
Instructions labeled as shown above, concern
critical steps or procedures which must be followed
in order to prevent accidents which could lead to
serious bodily injury or death.This mark is used to
indicate instructions which must be followed without
exception.
Instructions labeled as shown above concern steps or
procedures which, if not followed correctly, could lead
to mechanical failure, breakdown, or damage.
Used to label supplementary instructions designed
to provide hints or directions useful in the use of the
product.
WARNING! Incorrect or careless use
of a hedge trimmer can turn it into a
dangerous tool that can cause serious
or even fatal injury. It is extremely
important that you read and understand
the contents of this operator’s manual.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved hearing protection
• Approved eye protection
Always wear approved protective gloves.
Wear sturdy, non-slip boots or shoes.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technichal data and
on label.
