Bedienungsanleitung Husqvarna 325iLK (Seite 5 von 20) (Englisch)

733978

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or

temperature above 130 °C may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

Service

• Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers.

Other general safety information

• Deactivate the product before you move to another

area. Always remove the battery when passing the

product to another person.

• Never put the product down unless you have

deactivated it and removed the battery. Do not leave

the product unsupervised when it is switched on.

• The cutting tool does not stop immediately after the

product is turned off.

• Before using the product and after any impact, check

for signs of wear or damage and repair as

necessary.

• If anything jams in the cutting attachment while you

operate the product, stop and deactivate the product.

Make sure that the cutting attachment stops

completely. Remove the battery before you clean,

inspect or repair the product and/or the cutting

equipment.

• Do a check of the product before use. Refer to,

Safety devices on the product on page 7

and

Maintenance on page 12

. Do not use a defective

product. Do the safety checks, maintenance and

service instructions described in this manual.

• Faulty cutting attachment can increase the risk of

accidents.

• Check the gear for dirt and cracks. Clean off grass

and leaves from the gear using a brush. Gloves

should be worn when necessary.

• Always ensure that ventilation openings are kept

clear of debris.

• Check that the trimmer head is completely attached

to the trimmer.

• All covers, guards and handles must be fitted before

starting.

• Check that the product is in perfect working order.

Check that all nuts and screws are tight.

• Check that the trimmer head and trimmer guard are

not damaged or cracked. Replace the trimmer head

or trimmer guard if it has been exposed to impact or

are cracked. Always use the recommended guard for

the cutting attachment you are using. See chapter on

Technical data.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children should

be supervised to ensure that they do not play with

the appliance.

• Never allow children to use or be in the vicinity of the

machine. Since the machine is easy to start, children

may be able to start it if they are not kept under full

surveillance. This can mean a risk of serious

personal injury. Therefore disconnect the battery

when the machine is not under close supervision.

• Never allow children or other persons not trained in

the use of the product and/or the battery to use or

service it.

• Store the equipment in a lockable area so that it is

out of reach of children and unauthorized persons.

• The transport guard must always be used for storage

and transport.

• Keep hands and feet away from the cutting area at

all times and especially when switching on the

motor.

• Keep your hands and feet away from the cutting

attachment until it has stopped completely when the

product is deactivated.

• Do not remove the cut material, or let other persons

remove cut material, while the product is activated or

the cutting equipment rotates, as this can result in

serious injury.

• Keep in mind that it is you, the operator that is

responsible for not exposing people or their property

to accidents or hazards.

• Under no circumstances may the design of the

product be modified without the permission of the

manufacturer. Always use original accessories. Non-

authorized modifications and/or accessories can

result in serious personal injury or the death of the

operator or others. Your warranty may not cover

damage or liability caused by the use of non-

authorized accessories or replacement parts.

• The only accessories you can operate with this

product are the cutting attachments recommended in

the technical data chapter.

• Never use a product that has been modified in any

way from its original specification

• Never use a product that is faulty. Carry out the

safety checks, maintenance and service instructions

1318 - 002 - 04.12.2019

Husqvarna 325iLK Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 325iLK

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info