Bedienungsanleitung Husqvarna 450e (Seite 20 von 36) (Englisch)

477613

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

STARTING AND STOPPING

20 – English

1153136-26 Rev.1 2009-12-29

Starting and stopping

Starting

The chain brake must be engaged when the chain saw is

started. Activate the brake by moving the front hand guard

forwards.

(49)

Cold engine

Start position, 1: Set the start/stop switch in the choke

position by pulling the red control outward - upward.

(50)

Decompression valve (2): Press the valve to reduce the

pressure in the cylinder and make starting easier. Once

the machine has started the valve will automatically return

to its original setting.

(50)

Air purge (3): Press the air purge diaphragm repeatedly

until fuel ﬁlls the diaphragm (at least 6 times). The

diaphragm need not be completely ﬁlled.

(50)

Grip the front handle with your left hand. Hold the chain

saw on the ground by placing your right foot through the

rear handle.

(51)

Pull the starter handle, 4: Pull the starter handle with

your right hand and pull out the starter cord slowly until

you feel a resistance (as the starter pawls engage) then

pull ﬁrmly and rapidly until the engine ﬁres.

Push down the red choke control, 5: As soon as the

engine ﬁres which can be heard through a "puff" sound,

push down on the red choke control.

Pull the starter handle (6): Keep on pulling the cord

powerfully until the engine starts.

Warm engine

Start position, 1: The correct choke/start throttle setting

for warm starting is obtained by initially moving the choke

control by pulling the red control outward - upwards.

(50)

Decompression valve (2): Press the valve to reduce the

pressure in the cylinder and make starting easier. Once

the machine has started the valve will automatically return

to its original setting.

(50)

Air purge (3): Press the air purge diaphragm repeatedly

until fuel ﬁlls the diaphragm (at least 6 times). The

diaphragm need not be completely ﬁlled.

(50)

Push down the red choke control, 5: This inactivates

the choke, which is not needed when starting a warm

chain saw. However the movement of the start/stop switch

will have engaged a high idle, making warm starting

easier.

Pull the starter handle, 6: Grip the front handle with your

left hand. Hold the chain saw on the ground by placing

your right foot through the rear handle.

(51)

Pull the starter handle with your right hand and pull out

the starter cord slowly until you feel a resistance (as the

starter pawls engage) then pull ﬁrmly and rapidly until the

engine ﬁres.

As the chain brake is still engaged the speed of the

engine must be set to idling as soon as possible, this is

achieved by disengaging the throttle lock.

Disengagement is done by gently touching on the throttle

trigger. This prevents unnecessary wear to the clutch,

clutch drum and brake band. Allow the machine to idle a

few seconds before giving full throttle.

There is a simpliﬁed start reminder with illustrations to

describe each step on the rear edge of the saw (A).

(50)

CAUTION! Do not pull the starter cord all the way out and

do not let go of the starter handle when the cord is fully

extended. This can damage the machine.

Note! Reactivate the chain brake by pushing the front

hand guard back towards the front handle.

The chain

saw is now ready for use.

WARNING! Note the following before

starting:

The chain brake must be engaged when

the chain saw is started to reduce the

chance of contact with the moving chain

during starting.

Never start a chain saw unless the bar,

chain and all covers are ﬁtted correctly.

Otherwise the clutch can come loose and

cause personal injuries.

Place the machine on ﬁrm ground. Make

sure you have a secure footing and that

the chain cannot touch anything.

Keep people and animals well away from

the working area.

Never twist the starter cord around your

hand.

WARNING! Long term inhalation of the

engine’s exhaust fumes, chain oil mist

and dust from sawdust can represent a

health risk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 450e Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 450e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info