Bedienungsanleitung Husqvarna 530iPT5 (Seite 6 von 28) (Englisch)

734000

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

will ensure that the safety of the power tool is

maintained.

Pole pruner safety warnings - personal safety

• Keep all parts of the body away from the saw chain

when using the pole pruner. Before you start the

pole pruner, make sure the saw chain is not

contacting anything. A moment of inattention while

operating pole pruners may cause entanglement of

your clothing or body with the saw chain.

• Always hold the pole pruner with your right hand on

the rear handle and your left hand on the front

handle. Holding the chain saw with a reversed hand

configuration increases the risk of personal injury

and should never be done.

• Hold the pole pruner by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring or its own cord. Saw chains contacting a "live"

wire may make exposed metal parts of the pole

pruner "live" and could give the operator an electric

shock.

• Wear eye protection. Further protective equipment

for hearing, head, hands, legs and feet is

recommended. Adequate protective equipment will

reduce personal injury from flying debris or

accidental contact with the saw chain.

• Always keep proper footing and operate the chain

saw only when standing on fixed, secure and level

surface. Slippery or unstable surfaces may cause a

loss of balance or control of the pole pruner.

• When cutting a limb that is under tension, be alert for

spring back. When the tension in the wood fibres is

released, the spring loaded limb may strike the

operator and/or throw the pole pruner out of control.

• Use extreme caution when cutting brush and

saplings. The slender material may catch the pole

pruner and be whipped toward you or pull you off

balance.

• Follow instructions for lubricating, chain tensioning

and changing the bar and chain. Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

• Carry the pole pruner by the front handle with the

pole pruner switched off and away from your body.

When transporting or storing the pole pruner, always

fit the guide bar cover. Proper handling of the pole

pruner will reduce the likelihood of accidental contact

with the moving saw chain.

• Cut wood only. Do not use pole pruner for purposes

not intended. For example: do not use pole pruner

for cutting metal, plastic, masonry or non-wood

building materials. Use of the pole pruner for

operations different than intended could result in a

hazardous situation.

• Keep handles dry, clean and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

• Do not attempt to fell a tree until you have an

understanding of the risks and how to avoid them.

Serious injury could occur to the operator or

bystanders while felling a tree.

• This pole pruner is not intended for tree felling.Use

of the pole pruner for operations different than

intended could result in serious injury to the operator

or bystanders.

• We strongly recommend that first time users practice

sawing logs on a saw horse or cradle.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the pole pruner in the cut. Tip contact in some

cases may cause a sudden reverse reaction, kicking the

guide bar up and back towards the operator. Pinching

the pole pruner along the top of the guide bar may push

the guide bar rapidly back towards the operator. Either

of these reactions may cause you to lose control of the

pole pruner which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into

your pole pruner. As a pole pruner user, you should take

several steps to keep your cutting jobs free from

accident or injury. Kickback is the result of pole pruner

misuse and/or incorrect operating procedures or

conditions and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip, with thumbs and fingers

encircling the pole pruner handles, with both hands

on the pole pruner and position your body and arm

to allow you to resist kickback forces. Kickback

forces can be controlled by the operator, if proper

precautions are taken. Do not let go of the pole

pruner.

• Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the pole pruner in

unexpected situations.

• Only use replacement guide bars and pole pruners

specified by the manufacturer.Incorrect replacement

guide bars and pole pruners may cause chain

breakage and/or kickback.

• Follow the manufacturer’s sharpening and

maintenance instructions for the pole pruner.

Decreasing the depth gauge height can lead to

increased kickback.

General safety instructions

WARNING:

Read the warning instructions

that follow before you use the product.

• Remove the battery to prevent the product from

being started by accident.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others.

783 - 003 - 28.05.2019

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 530iPT5 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 530iPT5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info