Bedienungsanleitung Husqvarna 530iPT5 (Seite 10 von 28) (Englisch)

734000

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Examine the cutting attachment guard for damage and

replace if it is damaged. Only use the approved guard

for the cutting attachment.

Safety instructions for the cutting equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Only use the guide bar/saw chain combinations and

filing equipment that we recommend. Refer to

Accessories on page 24

for instructions.

• Use protective gloves when you use or do

maintenance on the saw chain. A saw chain that

does not move can also cause injuries.

• Keep the cutting teeth correctly sharpened. Obey the

instructions and use the recommended file gauge. A

saw chain that is damaged or incorrectly sharpened

increases the risk of accidents.

• Keep the correct depth gauge setting. Obey the

instructions and use the recommended depth gauge

setting. Too large depth gauge setting increases the

risk of kickback.

• Make sure that the saw chain has the correct

tension. If the saw chain is not tight against the guide

bar, the saw chain can derail. An incorrect saw chain

tension increases wear on the guide bar, saw chain

and chain drive sprocket. Refer to

To tension the

chain on page 20

• Do maintenance on the cutting equipment regularly

and keep it correctly lubricated. If the saw chain is

not correctly lubricated, the risk of wear on the guide

bar, saw chain and chain drive sprocket increases.

Battery safety

WARNING: Read the warning instructions

that follow before you use the product.

• Only use the BLi batteries that we recommend for

your product. The batteries are software encrypted.

• Use the BLi batteries that are rechargable as a

power supply for the related Husqvarna products

only. To prevent injury, do not use the battery as a

power supply for other devices.

• Risk of electrical shock. Do not connect the battery

terminals to keys, screws or other metal. This can

cause a short circuit of the battery.

• Do not use batteries that are non-rechargable.

• Do not put objects into the air slots of the battery.

• Keep the battery away from sunlight, heat or open

flame. The battery can cause burns and/or chemical

burns.

• Keep the battery away from microwaves and high

pressure.

• Do not try to disassemble or break the battery.

• Do not let battery acid touch your skin. Battery acid

causes injuries to the skin, corrosion and burns. If

you get battery acid in your eyes, do not rub but

flush with water for minimum 15 minutes. If battery

acid has touched your skin, you must clean the skin

with a large quantity of water and soap. Get medical

aid.

• Use the battery in temperatures between -10 °C (14

°F) and 40 °C (104 °F).

• Do not clean the battery or the battery charger with

water. Refer to

To clean the product, the battery and

the battery charger on page 21

• Do not use a defective or damaged battery.

• Keep batteries in storage away from metal objects

such as nails, screws or jewelry.

• Keep the battery away from children.

Battery charger safety

WARNING:

Read the warning instructions

that follow before you use the product.

10 783 - 003 - 28.05.2019

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 530iPT5 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 530iPT5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info