Bedienungsanleitung Husqvarna 540i XP (Seite 6 von 40) (Englisch)

733996

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

contacting anything. A moment of inattention while

operating chain saws may cause entanglement of

you clothing or body with the saw chain.

•Always hold the chain saw with your right hand on

the rear handle and your left hand on the front

handle. Holding the chain saw with a reversed

hand configuration increases the risk of personal

injury and should never be done.

•Hold the chain saw by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a ”live” wire may

make exposed metal parts of the chain saw ”live”

and could give the operator an electric shock.

•Wear eye protection. Further protective equipment

for hearing, head, hands, legs and feet is

recommended. Adequate protective equipment will

reduce personal injury from flying debris or

accidental contact with the saw chain.

•Do not operate a chain saw in a tree, on a ladder,

from a rooftop, or any unstable support. Operation

of a chain saw in this manner could result in

serious personal injury.

•Always keep proper footing and operate the chain

saw only when standing on fixed, secure and level

surface. Slippery or unstable surfaces may cause a

loss of balance or control of the chain saw.

•When cutting a limb that is under tension, be alert

for spring back. When the tension in the wood

fibres is released, the spring loaded limb may strike

the operator and/or throw the chain saw out of

control.

•Use extreme caution when cutting brush and

saplings. The slender material may catch the saw

chain and be whipped toward you or pull you off

balance.

•Carry the chain saw by the front handle with the

chain saw switched off and away from your body.

When transporting or storing the chain saw, always

fit the guide bar cover. Proper handling of the chain

saw will reduce the likelihood of accidental contact

with the moving saw chain.

•Follow instructions for lubricating, chain tensioning

and changing the bar and chain. Improperly

tensioned or lubricated chain may either brake or

increase the chance for kickback.

•Cut wood only. Do not use chain saw for purposes

not intended. For example: do not use chain saw

for cutting metal, plastic, masonry or non-wood

building materials. Use of the chain saw for

operations different than intended could result in a

hazardous situation.

•Do not attempt to fell a tree until you have an

understanding of the risks and how to avoid them.

Serious injury could occur to the operator or

bystanders while felling a tree.

•Follow all instructions when clearing jammed

material, storing or servicing the chain saw. Make

sure the switch is off and the battery pack is

removed. Unexpected actuation of the chain saw

while clearing jammed material or servicing may

result in serious personal injury.

•Do not operate a chain saw in a tree unless you

have been specifically trained to do so. Operation

of a chain saw in a tree without proper training

could increase the risk of serious personal injury.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some

cases may cause a sudden reverse reaction, kicking

the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar

may push the guide bar rapidly back towards the

operator. Either of these reactions may cause you to

lose control of the saw which could result in serious

personal injury. Do not rely exclusively upon the safety

devices built into your saw. As a chain saw user, you

should take several steps to keep your cutting jobs free

from accident or injury. Kickback is the result of chain

saw misuse and/or incorrect operating procedures or

conditions and can be avoided by taking proper

precautions as given below:

•Maintain a firm grip, with thumbs and fingers

encircling the chain saw handles, with both hands

on the saw and position your body and arm to allow

you to resist kickback forces. Kickback forces can

be controlled by the operator, if proper precautions

are taken. Do not let go of the chain saw.

•Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact

and enables better control of the chain saw in

unexpected situations.

•Only use replacement guide bars and saw chains

specified by the manufacturer. Incorrect

replacement guide bars and saw chains may cause

chain breakage and/or kickback.

•Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to

increased kickback.

SAVE THESE INSTRUCTIONS.

General safety instructions

WARNING: Read the warning

instructions that follow before you use the

product.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others. It is very important that you read

and understand the contents of this operator’s

manual.

61065 - 005 - 29.06.2020

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 540i XP Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 540i XP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info