Bedienungsanleitung Husqvarna 540i XP (Seite 9 von 40) (Englisch)

733996

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Your clothing must be close-fitting but not limit your

movements. Regularly do a check of the condition

of the personal protective equipment.

• Use an approved protective helmet.

• Use approved hearing protection. Long-term

exposure to noise can result in permanent damage

to the hearing.

• Use protective glasses or a face visor to decrease

the risk of injury from thrown objects. The product

can throw objects, such as wood chips, small

pieces of wood and more, at large force. This can

result in serious injury, especially to the eyes.

• Use gloves with saw protection.

• Use pants with saw protection.

• Use boots with saw protection, steel toe-cap and

non-slip sole.

• Always have a first-aid kit with you.

• Risk of sparks. Keep fire extinguishing tools and a

shovel near to prevent forest fires.

Safety devices on the product

WARNING: Read the warning

instructions that follow before you use the

product.

• Do not use a product with defective safety devices.

• Do a check of the safety devices regularly. Refer to

Maintenance and checks of the safety devices on

the product on page 25

• If the safety devices are defective, speak to your

Husqvarna servicing dealer.

Functions of the user interface

The user interface includes the start/stop button, the

SavE button, the battery status and the warning

indicator. The warning indicator flashes if the chain

brake is engaged or if there is a risk of overload. The

overload protection temporarily stops the product and

you cannot use the product until the temperature

decreases. If the warning indicator shows a solid light,

speak to your servicing dealer.

For more information about the user interface, refer to

Product overview on page 2

The automatic stop function

The product has an automatic stop function that stops

the product if you do not use it for one minute.

Chain brake and front hand guard

Your product has a chain brake that stops the saw

chain if you get a kickback. The chain brake decreases

the risk of accidents but only you can prevent them.

WARNING: Do not engage in

situations where there is a risk of kickback.

Be careful when you use your product and

make sure that the kickback zone of the

guide bar does not touch an object.

The chain brake engages (A) manually by your left

hand or automatically by the inertia release

mechanism. Push the front hand guard (B) forward to

engage the chain brake manually. This movement

starts a spring-loaded mechanism that stops the drive

sprocket.

How the chain brake is engaged is in relation to the

force of the kickback and position of the product. If you

get an intense kickback while the kickback zone is

farthest away from you, the chain brake engages by

the inertia release. If the kickback is small or the

1065 - 005 - 29.06.2020 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 540i XP Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 540i XP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info