Bedienungsanleitung Husqvarna 540i XP (Seite 16 von 40) (Englisch)

733996

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

5. To disconnect the battery charger from the mains

socket, pull the plug. Do not pull the cable.

6. Remove the battery from the battery charger.

Note: Refer to the battery and battery charger

manuals for more information.

Kickback information

WARNING: A kickback can cause

serious injury or death to the operator or

others. To decrease the risk you must

know the causes of kickback and how to

prevent them.

A kickback occurs when the kickback zone of the guide

bar touches an object. A kickback can occur suddenly

and with large force, which throws the product in the

direction of the operator.

Kickback always occurs in the cutting plane of the

guide bar. Usually, the product is thrown against the

operator but can also move in a different direction. It is

how you use the product when the kickback occurs

that causes the direction of the movement.

Kickback only occurs if the kickback zone of the guide

bar touches an object. Do not let the kickback zone

touch an object.

A smaller bar tip radius decreases the force of the

kickback.

Use a low kickback saw chain to decrease the effects

of kickback. Do not let the kickback zone touch an

object.

WARNING: No saw chain fully

prevents kickback. Always obey the

instructions.

Common questions about kickback

•Will the hand always engage the chain brake

during a kickback?

No. It is necessary to use some force to push the

front hand guard forward. If you do not use the

force necessary, the chain brake will not be

engaged. You must also hold the handles of the

product stable with two hands during work. If a

kickback occurs, it is possible that the chain brake

does not stop the saw chain before it touches you.

There are also some positions in which your hand

can not touch the front hand guard to engage the

chain brake.

•Will the inertia release mechanism always engage

the chain brake during kickback?

No. First, the chain brake must operate correctly.

Refer to

Maintenance and checks of the safety

devices on the product on page 25

for instructions

about how to do a check of the chain brake. We

recommend you to do this each time before you

use the product. Second, the force of the kickback

must be large to engage the chain brake. If the

chain brake is too sensitive, it can engage during

rough operation.

•Will the chain brake always protect me from injury

during a kickback?

No. The chain brake must operate correctly to give

protection. The chain brake must also be engaged

during a kickback to stop the saw chain. If you are

near the guide bar, it is possible that the chain

brake does not have time to stop the saw chain

before it hits you.

WARNING: Only you and the correct

working technique can prevent kickbacks.

To start the product

1. Do a check of the power trigger and power trigger

lockout. Refer to

To do a check of the power trigger

lockout on page 26

16 1065 - 005 - 29.06.2020

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 540i XP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 540i XP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info