Bedienungsanleitung Husqvarna 545F (Seite 5 von 40) (Englisch)

734096

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Long-term exposure to noise can result in permanent

hearing loss. Always use approved hearing

protection.

• Listen for warning signals and loud voices when you

use hearing protection. Always remove your hearing

protection when the engine stops.

• Never use the product if it is changed or defective.

• Make sure that the spark plug cap and ignition lead

are not damaged to prevent the risk of electrical

shock.

• Look around the work area to make sure that no

persons, animals or objects have a negative effect

on the safety of the operation of the product.

• Look around the work area to make sure that no

persons or animals touch the cutting attachment or

are hit by objects that are ejected from the cutting

attachment.

• Examine the work area. Remove all loose objects,

such as stones, broken glass, nails, steel wire and

string, that can eject or wind around the cutting

attachment.

• Do not use the product in a situation or location

where you can not get aid if an accident occurs.

• Do not use the product without an approved cutting

attachment guard.

• Make sure that persons or animals keep a distance

of a minimum of 15 m/50 ft during work. Always look

behind you before you turn around with the product.

Stop the product immediately if a person or animal

enters the 15 m/50 ft safety zone. If more than 1

operator does work in the same area, keep a safety

distance of a minimum of 2 times the tree height and

a minimum of 15 m/50 ft.

• Make sure that you can move safely and have a safe

stance. Examine the area around you for obstacles

such as roots, rocks, branch and ditches. Be careful

during work on slopes.

• Do not overreach. Keep a stable position of the feet

and a good balance at all times.

• Before you start the product, put it on a flat surface,

at a minimum ot 3 m/10 ft from the fuel source and

from where you fill fuel. Make sure that there are no

objects near or touching the cutting attachment.

• If the cutting attachment rotates at idle speed, let a

service agent adjust it. Do not use the product until it

is adjusted or repaired.

• Look out for thrown objects. Always use approved

eye protection and keep away from the cutting

attachment guard. Stones and other small objects

can eject into your eyes and cause blindness or

other injuries.

• Do not put the product down with the engine on

unless you have it in clear view.

• Do not remove the cut material, or let other persons

remove cut material, while the engine is on or the

cutting equipment rotates, as this can result in

serious injury.

• Always stop the engine and make sure that the

cutting equipment does not rotate before you remove

material that is wound around the blade shaft or

caught between the cutting attachment guard and

the cutting attachment.

• Be careful when you remove material from around

the cutting equipment. The bevel gear gets hot

during operation and can cause burn injuries.

• The exhaust fumes from the engine are hot and can

contain sparks. Risk of fire. Be careful around dry

and flammable material.

• Never use the product indoors or in spaces lacking

proper ventilation. Exhaust fumes contain carbon

monoxide, an odourless, poisonous and highly

dangerous gas.

• Stop the engine before you move to a new work

area. Always attach the transport guard before you

move the equipment.

• Overexposure to vibration can lead to circulatory

damage or nerve damage in persons who have poor

circulation. Speak to your physician if you

experience symptoms of overexposure to vibration.

Such symptoms include numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes in

skin colour or condition. These symptoms usually

show in the fingers, hands or wrists. The risk

increases at low temperatures.

Personal protective equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Always use approved personal protective equipment

when you use the product. Personal protective

equipment cannot fully prevent injury but it

decreases the degree of injury if an accident does

occur. Let your dealer help you select the correct

equipment.

• Use a helmet if the trees in the work area have a

height of more than 2 m/6.5 ft.

1018 - 004 - 06.02.2020 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 545F Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 545F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info