Bedienungsanleitung Husqvarna 560XPG (Seite 8 von 40) (Englisch)

477639

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Take care when handling fuel and chain oil. Be

aware of the risks of fire, explosion and those

associated with inhalation.

• Do not smoke and do not place any hot objects in

the vicinity of fuel.

• Always stop the engine and let it cool for a few

minutes before refuelling.

• When refuelling, open the fuel cap slowly so that any

excess pressure is released gently.

• Tighten the fuel cap carefully after refuelling.

• Never refuel the machine while the engine is

running.

• Always move the product at least 3 m (10 ft) away

from the refuelling area and fuel source before

starting.

After refuelling, there are some situations where you

must never start the product:

• If you have spilled fuel or chain oil on the product.

Wipe off the spillage and allow remaining fuel to

evaporate.

• If you have spilled fuel on yourself or on your

clothes. Change your clothes and wash any part of

your body that has come in contact with fuel. Use

soap and water.

• If the product leaks fuel. Regularly do a check for

leaks from the fuel tank, fuel cap and fuel lines.

Safety instructions for maintenance

WARNING: Read the warning instructions

that follow before you do maintenance on

the product.

• Do only the maintenance and servicing given in this

operator's manual. Let professional servicing

personnel do all other servicing and repairs.

• Regularly do the safety checks, maintenance and

service instructions given in this manual. Regular

maintenance increases the life of the product and

decreases the risk of accidents. Refer to

Maintenance on page 21

for instructions.

• If the safety checks in this operator's manual is not

approved after you do maintenance, speak to your

servicing dealer. We guarantee that there are

professional repairs and servicing available for your

product.

Safety instructions for the cutting equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Only use the guide bar/saw chain combinations and

filing equipment that we recommend. Refer to

Accessories on page 35

for instructions.

• Use protective gloves when you use or do

maintenance on the saw chain. A saw chain that

does not move can also cause injuries.

• Keep the cutting teeth correctly sharpened. Obey the

instructions and use the recommended file gauge. A

saw chain that is damaged or incorrectly sharpened

increases the risk of accidents.

• Keep the correct depth gauge setting. Obey the

instructions and use the recommended depth gauge

setting. Too large depth gauge setting increases the

risk of kickback.

• Make sure that the saw chain has the correct

tension. If the saw chain is not tight against the guide

bar, the saw chain can derail. An incorrect saw chain

tension increases wear on the guide bar, saw chain

and chain drive sprocket. Refer to

To adjust the

tension of the saw chain on page 28

• Do maintenance on the cutting equipment regularly

and keep it correctly lubricated. If the saw chain is

587 - 002 - 04.12.2019

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 560XPG Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna 560XPG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info